Automatic Sheath Inner And Outer Skinning Multi - Core Wire Cutting
Stripper Stripping Terminal Crimping Machine
Equipment Configuration
With the German high pixel image detection system
Industrialrobot(EPSON), Module(THK), Electric(YASKAWA),
Cylinder(SMC), Sensor(Omron), CCD Camera(Germany Basler),
Reducer(xinbao)
Equipment function
1. It can process 36 different specifications and colors of wire
and the amount of pin is unlimited
2. The whole machine has the function of twisting wire and sticking
tin
3. With visual detection and pressure detection function
4. The maximum speed can reach to 1000pcs/H
Wide variety with up to 36 wire types
The different wire types for versatile wire
harness production are available on the
Loong machines without the need for
changeovers. The automatic wire changer
provides up to 36 different wires from the
entire cross-section range. This enables the
range of wires required in the construction of control
cabinets,which to be covered perfectly.
Automated inkjet printers mark the wires
The marked wires are picked up by a shuttle system and guided in
loops to the processing machines.
Continuous data flow and traceability Production data can be sent
directly to the machine via a network. The quality data from the
production process is saved for each wire harness and traceability
is guaranteed at all times.
Technical Parameters
| Mechine Function | Wire measuring cutting, One-end soldering, One-end crimping,
One-end Insertion, HOUSING feeder, Touch screen can debugging the
crimping height, Discharge the defective product on-line inspection |
| Capacity | One-end soldering, One-end crimping, Insertion 1000PCS/H |
| Drive Mode | PLC Control |
| Wire Size | 0.13-6.0mm2 |
| Mould Assembly Type | Assemble AS40, AS42, AE30( Customized Acceptable) |
| Wire Cutting Length | 280-9999mm |
| Cutting Precision | ±0.5mm |
| Stripping Length | 1.0-15.0mm |
| Penetraction Depth | MAX 3mm |
| Crimping Capacity | 2 TON servo motor two sets mute specifications |
| Detection Device | Wire exists or not, wire overload, terminal exists or not, terminal
overload, HOUSING exists or not, insertion exists or not, Terminal
detection visual monitor, pressure sensor device |
| Power Source | 3 phase/380V/50Hz |
| Power | 7.5KW |
| Compressed Air | 0.5Mpa about 170NL/Min |
