Smallest Tension Load Cell 10N 20N 50N 100N 200N Smallest Tension
Force Sensor
Smallest Tension Load Cell FLAE is made of stainless steel
utilizing strain gauge technology to deliver maximum 0.2%
non-linearity of rated output. Smallest Force Transducer FLAE
offers 0-10N / 0-20N / 0-50N / 0-100N / 0-200N five rated
capacities to choose from. M3 threaded holes located on two sides
of the transducer can be used to mount attachments or implements to
adapt to different force measurement cases, miniature column type
load cell FLAE can be used for both tension and compression force
measurement. Stainless steel construction, compact size,
bidirectional force measurement, high accuracy, Smallest Tension
Force Sensor FLAE offers a perfect mixture for applications such as
wire tension control, force distribution analysis, automated
control, cylinder thrust measurement, assembly force monitoring,
spring testing, ultrasonic welding clamp force control and so on.
In addition to the standard specifications, Forsentek is also
capable of providing custom design service to meet requirements of
different applications.
| Ordering code | Measurement Range | Force direction |
| FLAE-10N | 0-10N / 0-1kgf | Tension and compression |
| FLAE-20N | 0-20N / 0-2kgf |
| FLAE-50N | 0-50N / 0-5kgf |
| FLAE-100N | 0-100N / 0-10kgf |
| FLAE-200N | 0-200N / 0-20kgf |
Specifications
| Capacity | 10N / 1kg / 2lb
20N / 2kg / 4lb
50N / 5kg / 11lb
100N / 10kg / 22 lb
200N / 20kg / 45 lb |
| Rated output | 2.0 mV/V |
| Excitation | 3-12V |
| Zero balance | ±0.1mV/V |
| Nonlinearity | ±0.2% of the capacity |
| Hysteresis | ±0.2% of the capacity |
| Nonrepeatability | ±0.1% of the capacity |
| Creep(5min) | ±0.1% of the capacity |
| Safe overload | 150% of the capacity |
| Ultimate overload | 200% of the capacity |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.03% R.O./oC |
| Temperature shift span | ±0.02% R.O./oC |
| Input resistance | 380±30 ohms |
| Output resistance | 352±3 ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | IP50 |
| Material of element | Stainless steel |
| Cable | Ø2*3000mm 4-core shielded |
| Wiring code | Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
A Force Sensor is a transducer that converts mechanical load into
mV signal proportional to the applied force.The acting force causes
deformation of the measuring element,the bonded strain gage deforms
accordingly which will cause the resistance change of the
wheatstone bridge,under constant power supply, the output signal
between Sig+ and Sig- will change proportionally,thus the
load/force can be measured by measuring the output signal from the
transducer.
Load cell output: = (Power supply * Rated output) * Load / Capacity
Rated output of Smallest Tension Load Cell FLAE is around 2.0mV/V.
Power supply of Smallest Tension Force Sensor FLAE is normally
within 3-12V.
Load / Capacity is within 0-1.
So the output range of Smallest Tension Force Transducer FLAE is
normally within -24mV...+24mV for tension/compression force
measurement.
Example one:Miniature Compression And Tension Load Cell FLAE-10N
with 2.0mV/V sensitivity powered by 5V DC,the output range is
-10mV...+10mV.
Example two: Micro Force Transducer FLAE-20N with 2.0mV/V
sensitivity powered by 10V DC,the output range is -20mV...+20mV.
A signal conditioner can be used with the load cell to deliver
-5~5V, 0-10V or 4-20mA output.
Example: Miniature Force Load Cell FLAE-100N working with -10-10V
amplifier,the Force-Voltage relationship will be 0-100N compression
load VS 0-10V output,0-100N tension load VS 0-(-10V) output,when
you get 5V output,it means the current load is 50N compression
force,when you get -1V output,it means the current load is 10N
tension force,and so on.
Smallest Tension Load Cell 10N 20N 50N 100N 200N Smallest Tension
Force Sensor
Click here to download datasheet
