TYCKK Permanent Magnet Synchronous Motor
Product overview
The products are widely used in electric power, metallurgy,
chemical industry, building materials, water source treatment, coal
mine, mining, textile, rubber, glass, petroleum, transportation,
medicine, papermaking, food and other industries, helping
enterprises to reduce emissions, save energy, reduce consumption
and green production.
Structure and working principle of high-efficiency and
energy-saving operation:
The stator structure of the high-voltage and high-efficiency
asynchronous starting permanent magnet synchronous motor is similar
to that of the ordinary Y series asynchronous motor. The company's
R&D team adopts modern high-performance motor design theory and
design technology to optimize the iron core and winding; the rotor
is embedded with high-function rare earth "Magnetic King", and the
squirrel cage structure is optimized, which can generate higher
than ordinary asynchronous motors at rated voltage and rated
frequency. starting torque.
Rare earth "Magnetic King" is recognized by the world as the
permanent magnet material with the highest magnetic energy product
in the world. After saturation magnetization, it presents a
"permanent magnetic field". After the motor is installed, there is
no need for the reactive excitation current of the power supply,
the permanent magnetic field of the "magnet king", and the
interaction with the three-phase current of the winding to generate
stable electromagnetic torque to drive the load.
This structural feature of the permanent magnet motor makes the
power factor high. Under the condition of ensuring the same output
power, the current is significantly reduced, the resistance loss of
the winding is reduced, there is basically no rotor loss during
operation, and it exhibits remarkable high efficiency and energy
saving characteristics. Due to the reduction of total loss, the
temperature rise is more than 30K lower than that of ordinary
asynchronous motors, and the operating life is extended. This is
the basic working principle of an asynchronous start permanent
magnet synchronous motor.
TYCKK series high-voltage high-efficiency asynchronous starting
permanent magnet synchronous motor
The basic series are three-phase, 6KV, 10KV, 50HZ, air-to-air
cooling, protection class IP54, F-class insulation, installation
form IMB3, working system S1. It can meet the user's requirements
for other protection levels, cooling methods, installation forms,
etc.
Requirements for use: The altitude is below 1000 meters, and the
ambient temperature is -15℃～+40℃.
Product specifications
| POWER RANGE: | 400-15000kw | VOLTAGE: | 3kv-11kv |
|---|
| SPEED RANGE: | 100, 125, 150, 167, 187.5, 200, 250, 300r/min | POLES: | 60, 48, 40, 36, 32, 30, 24, 20 |
|---|
| FREQUENCY: | 50hz,60hz | COOLING METHOD: | IC01,IC37,IC81W |
|---|
| IP RATE: | IP00, IP20, IP21, IP23, IP44, IP54, IP55 | STANDARD: | IEC,GB |
|---|
Each series of motors
Our aftersales service
Product packaging
Certifications
