l Support flexible QinQ VLAN,DHCP server/relay and IGMP/ MLD multicast monitoring function;
l Support diagnostic monitoring and remote disabling of fiber optical;
l Support 802.11n Wi-Fi(T/R)function;
l CATV function manageable,support CATV remote shutdown;
l Support NAT and firewall function;
l WAN support networking bridge, route and bridge/route mixed mode;
l Full speed 1G non-blocking switching
l 2048 MAC address table
l Support VLAN, transparent, tag, translation, trunk, etc.
l Integrated port monitoring, port mirroring, port rate limiting,
port SLA, etc
l Integrated IEEE802.1p QoS with four level priority queues
l Support IPv4/ IPv6 IGMP snooping and MLD snooping
l Support bridge, route and bridge/route mixed mode
Technical items | Descriptions |
Dimension | 185*145*50mm(length*width*highs) |
Net weight | ≤0.3Kg |
Fiber port | SC/APC (Single fiber) SC/UPC& SC/APC(Dual fiber ) Downstream rate 1.25Gbps, Upstream rate 1.25Gbps |
Wavelength | Tx 1310nm, Rx 1490nm, RF1550nm |
Fiber interface | SC/PC |
RX sensitivity | <-27dBm (1490nm) |
WLAN | IEEE802.11b/g/n,300Mbps, a built-in antenna |
LAN | 1*10/100/1000Mbps+3*10/100Mbp adaptive Ethernet ports, full/half
duplex, RJ45 interface |
Throughput | Throughput can reach 900Mbps or more |
DC power | 12V 1A, external AC-DC power adapter |
POTS | 1*FXS, RJ11 connector |
Button | Reset, power, WIFI |
Power | ≤10W |
Operation | Working temperature: -5-+55℃ working
humidity:10-90%(non-condensation) |
Storage | Storage temperature: -30℃-+60℃ storage humidity:
10-90%(non-condensation) |
CATV Parameters | Optical Receive | -15~+2 dBm |
1. | AGC range | -8~+2 dBm |
2. | Fiber return loss | >50 dB |
3. | wave length | 1100~1600 nm |
4. | Connector | SC/APC |
5. | C/N | ≥ 50 dB |
6. | C/CTB | ≥ 62 dB |
7. | C/CSO | ≥ 61 dB |
8. | BW | 40~ 1000 MHz |
9. | Output level | ≥ 82 dBμV |
