Main Features:
1. The Omnidirectional wall scraping and mixing adopts a frequency
converter to adjust the speed. At low temperatures and high
viscosity, it can reduce the formation of bubbles.
2. Jacket heating and cooling function (steam/electric heating)
3. The pot body is welded by three layers of stainless steel
plates, mirror polished, in line with GMP requirements.
4. High-speed shearing homogenizer 3600rpm, strong mixing of solid
and liquid raw materials.
5. Schneider switch control button, Delta inverter, Omron temperature
control
1. Main Tank:
* Capacity: Fully Volume: 1200L, Working Volume: 1000L
* Inner tank: SUS316L, Thickness: 6mm (Single Layer Tank)
Jacket: SUS304, Thickness: 6mm
Shell: SUS304, Thickness: 4mm
2. Lid Parts: Half open hinged lid
* GMP hygiene standards, made for SUS304(Can do cusotmized), Can
open the lid at any time during the making products process, easy
to cleaning
3. Water circulation: Mechanial seal cooling system. Protect the Homogenizer to use
longer
4. Agitator Motor:
* SIEMENS motor and reducer (can change to ABB motor)
* Power: 7.5KW
* Speed: 0-75rpm
5. Agitator:
* Mixing part: Frame oar scraping blender with one fixed oar.
* Stirrer paddle: Stir up and down, mixing more evenly.
* Wall Scraper: PTFE material, Scraping off the materials that
stick on pot wall, to make all materials mixing more evenly.
6. Bottom Homgenizer (can choose upper homogenizer):
* SIEMENS motor
* Power: 7.5KW
* Speed: 0-3600rpm
* Homogenizer part: Rotor and stator adopts wire-cutting finish
machining high shearing homogenizer, smooth emulsion to 2m.
7. Discharge part: Bottom discharge, dished bottom design and bottom flat valve to
make discharge completely.
8. Electric control system & Platform
* Shell material: SUS304, thickness: 2mm
* Standard Configuration: Instrument, button, appliance components
* All SUS and equipped with anti-skid plate
Our Servers:
We provide Turn-key project service to customer.
1. Factory Layout design;
2. Factory Decoration based on GMP standard;
3. Formula of products;
4. Raw material etc;
5. Machine design, whole production line from A to Z;
6. Shipping service, FOB, CFR, CIF etc;
7. Installation service. Training service, Maintenance service.
