Semi Automatic Argon Gas Filling Machine special equipment for
inflatable hollow glass
Gas filling machine comprises of three parts. There are filling
gas, controlling and detection. The filling gas part mainly
comprises outlet circuit, return circuit and control valve. The
controller part mainly comprises touch screen, start group
selection switch, controlling button, controller and buzzer alarm.
Detection part mainly comprises sensor.
Main Feature
- High effectively, allowed for four IG glass
- When the gas is full,it will alarm and stop automatically
Main technical parameter
| Power supply | 220V 50Hz |
| Total power | 0.1kw |
| Dimension | 620*439*700mm |
Benefits of insulating glass filled with argon gas
· Thermal conductivity of inert gas is lower than air. For example,
argon has a thermal conductivity 67% than that of air or in other
words, its thermal conductivity is approximately 30% lower than
that of air. The lower the thermal conductivity, the better is the
thermal insulation efficiency. Reduction of heat loss through the
insulated glass results in an overall increase in energy efficiency
of the window.
· U-values and R-values are significantly improved. For example, U
value of single clear glass is 5.4 and ordinary double glazing is
2.6 and argon gas filled insulated glass is further reduced to 1.6.
Inert gas filled double glazing is significantly energy save.
· Selected inert gas remarkably improves noise insulation.
· Argon filled double glazing unit reduces air convection within
the sealed air space. It increases dimensional stability. The two
glass panes are not distorted irrespective of changes of climate,
atmospheric pressure, season and altitude, etc.
· Inert gas helps pressure balance between interior and exterior
pressures of double glazing.
· Inert gas is almost free of moisture. Even if desiccant or
sealing goes wrong, the gas would not get humid. No condensation or
dew would occur with inert gas.
· If environmental humidity is high, it is recommended not to
assemble insulated glass if inert gas is not employed for air
moisture is high. Desiccant may not be able to dry the air
thoroughly. With inert gas, insulated glass could be assembled
under any humidity environment all the year around.
· If same thermal and phonic insulations properties are required,
inner space is thinner with inert gas than that with ordinary air.
Inner space thickness may be further reduced with selected inert
gas. This reduces IGU and framework materials, production and
installation costs.
· If insulated glass is solar control or low-e glass with coating
film.
