PE PP Single - Wall Corrugated Pipe Extrusion Line, Corrugated Pipe
Extruder
This line is designed to produce single wall conrrugated pipe which
material is PP,PEand PA etc,special designed screw,special
structured screw and special structure mould an protect screw and
barrel from easy-abrasion and give an easy forming process ,This
kind of pipe,protect pipe of car and train ,supply and drainage
pipe for washer, irrigation of farm and so on.
Main Technical Parameters:
| MAIN MACHINE MODEL | SJ-35 | SJ-45 | SJ-65 |
| PIPE DIAMETER RANGE(MM) | 6-12 | 9-25 | 25-50 |
| MAIN MACHINE I/D | 30:1 | 30:1 | 30:1 |
| OUTPUT(KG/H) | 15 | 30 | 60 |
| MAIN MOTOR CAPACITY(KW) | 5.5 | 11 | 18.5 |
| FORMING MACHINE CAPACITY(KW) | 1.5 | 2.2 | 3.0 |
| PAIR OF MODULES | 42 | 42 | 50 |
| COOLING MODE | WATER&AIR COOLING |
| PRODUCTION SPEED (M/MIN) | 5-12 | 5-12 | 5-12 |
| INSTALLED POWER(KW) | 12 | 20 | 30 |
1. The extruder adopts frequency conversion control, simple
adjustment, reliable operation, stable operation and low energy
consumption.Extruder, machine head and traction adopt one-body
vertical cabinet, which is convenient for the centralized control
and operation of the whole set of equipment.
2. The extruder screw and cylinder are made of 38CrMOAlA high
quality nitrided steel, which has been forged, tempered and
nitrogenated. The unique design has made the material plasticized
with good effect and stable production.
3. Central feed head is adopted for pipe forming, and spray cooling
combined with water immersion type is adopted for vacuum sizingHigh
precision, even thickness
4. Special v-type crawler tractor is adopted to ensure that the
pipe is not easy to produce traction deformation.
5, coiling machine adopts three-phase asynchronous torque motor
controller, effectively overcome the center tension defects, and is
controlled by a separate electric cabinet, to better facilitate the
independent operation, control of production process.
6. When producing small pipe diameter pipe, vertical hard pipe coil
pipe is adopted;In the production of large diameter pipe, the use
of pipe stack frame, with appropriate pipe cutting device, can
produce different specifications of hard pipe.
