PVC Pipe Extrusion Line Double Screw 220 - 415V Input Voltage
SAIJIA MACHINERY
Continously Innovating And Manufacuturing Of Plastic Machinery
ZHANGJIAGANG SAIJIA MACHINERY TECHNOLOGY CO.,LTD.
Our main products are: plastic pipe extrusion line and plastic
machine.
The main products are popular exported to international
market,including Russia,Australia, Southeast Asia,Middle East,East
Europe.Africa and other countries.
PVC Pipe.
1. It has good tensile and compressive strength: but its
flexibility is not as good as other plastic pipes.
2. Low fluid resistance: The wall of PVC-U pipe is very smooth and
has little resistance to fluid. Its roughness coefficient is only
0.009. Its water delivery capacity is 20% higher than that of cast
iron pipes of the same pipe diameter and 40% higher than that of
concrete pipes.
3. Excellent corrosion resistance and chemical resistance: PVC-U
pipes have excellent acid resistance, alkali resistance, and
corrosion resistance, and are not affected by damp water and soil
pH. No anti-corrosion treatment is required when laying pipelines.
4. Anti-bite: PVC-U tube is not a source of nutrition, so it will
not be corroded by rodents. According to a test conducted by the
National Sanitation Foundation in Michigan, rats will not bite
PVC-U pipes.
5. It has good water tightness: the installation of PVC-U pipes,
regardless of whether it is connected by bonding or rubber ring,
has good water tightness.
6. Performance test: curing time, shrinkage, splitting strength,
tensile performance, peeling strength, thermal stability, pot life,
storage period, release of harmful substances.
If you want to know more about Plastic Pipe Extrusion Line, inquiry
us now!
PVC Pipe Extrusion Line.
Our company has full range of PVC pipe extrusion line, including
four cavity pipe extrusion line, double cavity pipe extrusion line
and large diameter pipe extrusion line. Our company will also
provide basic formula for PVC pipe production, customer can adjust
easily based on the formula. We manufacture machines for production
of different PVC pipes, including U-PVC, C-PVC, M-PVC, PVC-O pipes,
etc.
Our PVC pipe extrusion line can produce from size of minimum 16mm to 1000mm with single layer or multi-layer.
Product Paramenters
| Model | Pipe Range (mm) | Output Capacity (kg/h) | Main Motor Power (kw) |
| PVC32SS* | 16 - 32 (×4) | 180 - 250 | 22 - 37 |
| PVC63 | 16 - 63 | 180 - 250 | 22 - 37 |
| PVC63SS* | 16 - 63 (×2) | 250 | 37 |
| PVC110 | 20 - 110 | 250 | 37 |
| PVC160 | 50 - 160 | 250 | 37 |
| PVC250 | 75 - 250 | 450 | 55 |
| PVC450 | 110 - 450 | 450 - 800 | 55 - 110 |
| PVC630 | 250 - 630 | 800 | 110 |
| PVC800 | 315 - 800 | 1000 | 132 |
| PVC1000 | 400 - 1000 | 1200 | 160 |
S* means double-strand/cavity, two pipes produced at same time.
SS* means four-strand/cavity, four pipes produced at same time. |
| Production Line Parameter (for reference only, can be customized) |
ZHANGJIAGANG SAIJIA MACHINERY TECHNOLOGY CO.,LTD.
Zhangjiagang Saijia was established in 2000. The production
experience is mature and rich. Among them, it has been exporting
for more than 20 years, and more than 100 countries have exported.
The annual export turnover is about 15 million US dollars. Our
company's production base covers more than 50,000 square meters. ,
Modern office and production room more than 35,000 square meters,
with experienced high-quality staff team, first-class equipment,
perfect and effective quality assurance system, advanced and
complete testing equipment.
Workshop
We know the quality is the life of our company. Our company insists
to manufacture all machine units by ourselves in order to control
quality strictly by our quality inspectors. To implement this
concept, we have built our own tooling and CNC workshop. Even if
some parts from our certified supplier, our quality inspector will
check these parts before entering into our warehouse.
Warmly welcome to visit our workshop, and sincerely hope we can
have long term cooperation in near future!
Certificates
International certification, verification certificates of equipment
include:CE electrical certificate, CE mechanical certificate, ISO
quality management certificate, Nigerian quality certificate etc.
FAQ
1) Are we manufacture or trade company?
We are manufacture,have 20 years' experiences in this field.
2) What kind machines we produce?
Our factory produce plastic pipes machines, plastic machine.
3) What kind payment we accept?
Payment term like T/T, L/C.
4) How long we need to produce the machines?
According to different machine model and configuation, we need
different time, like 40 days to 2 months.
5) Will the machine be delivered on time ?
Sure,we will deliver your machine up recieving the balance payment.
6) How about the machine quality?
Our machine quality is reliable.We select every parts on the
machine strictly and production and installation is done by
professional workers.We test each production step for the best
machine.
7) How about the price?
You know ,the goods counts the the price.We select the best machine
raw material such as siemens electrics,schneider and ABB etc.We
will provide you the best machine with best price.
8) How long is your machine’s guarantee time?
One year
9) What can you provide for after sale service?
We can send engineers to your factory for installation and
training.also 24 hours on-line service for you.
