PY Series Push To Quick Connect Tube Pneumatic Hose Fittings Union
Y
Brando's plastic push-to-connect pneumatic hose fittings for
industrial low pressure fluids transfert, which is the most
intuitive and efficiency way of connecting tubes to a fitting in
order to create a fluid distribution network. Thanks to its quick
installation, versatility and exceptional lifespan, the plastic
push-in fitting contributes to improving machine efficiency and
cost reduction. All of our plastic push to connect fittings are
available with a wide selection of configurations and plastic
materials suitable for a wide of fluids among other things
compressed air, gas, water, food liquids and beverages or
chemicals, that serve across many of today's major industrial
markets.
Product Features:
1. High Strength, Wear Resistance, Corrosion Resistance, High
Density, Not Easy to Burst.
2. The Product is Sturdy and Durable and Has a Long Service Life.
3. Easy Installation and Disassembly, Good Sealing Performance.
4. It Can be Used for The Connection of pipes and The Use of
Different Pneumatic Components, and Has a Wide Range of Uses.
5. You Can Easily Insert or Pull out the Trachea Without Any Tools
6. The Clip of Connecting Air Pipe is Made of Strong Plastic
Material, Which is Not Easy to Fall off After Connection Adopt
Sealing Component, Keep Good Sealing, Not Easy to Leak.
7.Freely Change Pipeline Direction After Installation, Easy to
Insert or Pull Trachea Manually Without Tools.
Dimension & Order Code of Pneumatic Hose Fittings:
Union Straight Fitting:
| Picture | Dimension | Part No. | D | D1 | L |
 |  |
| PUC4 | 4 | 11 | 33 |
| PUC6 | 6 | 13 | 34 |
| PUC8 | 8 | 14 | 39 |
| PUC10 | 10 | 18 | 46 |
| PUC12 | 12 | 21 | 47 |
Union Elbow Fitting:
| Picture | Dimension | Part No. | D | D1 | L |
 |  |
| PUL4 | 4 | 11 | 19 |
| PUL6 | 6 | 13 | 20 |
| PUL8 | 8 | 14 | 23 |
| PUL10 | 10 | 18 | 27 |
| PUL12 | 12 | 21 | 30 |
Union Tee Fitting:
| Picture | Dimension | Part No. | D | D1 | L |
 |  |
| PUT4 | 4 | 11 | 19 |
| PUT6 | 6 | 13 | 20 |
| PUT8 | 8 | 14 | 23 |
| PUT10 | 10 | 18 | 27 |
| PUT12 | 12 | 21 | 30 |
| Picture | Dimension | Part No. | D | D1 | L |
 |  |
| PY4 | 4 | 11 | 37 |
| PY6 | 6 | 13 | 40 |
| PY8 | 8 | 14 | 41 |
| PY10 | 10 | 18 | 49 |
| PY12 | 12 | 21 | 53 |
List of All Plastic Pneumatic Hose Fittings:
Choosing the Right Fittings for Your Pneumatic System:
Fittings help control the force and directional flow of compressed
gas or air used in pneumatic systems. One of the first
considerations in choosing a connector is the type of vessel that
you will be connecting to such as the flexibility of the hose or
tube, as well as the inner diameter (ID) and outer diameter (OD) of
the vessel to ensure an adequate seal and secure connection.
Fitting material choice for your pneumatic connector is also
important, including gas compatibility or resistance to heat or
corrosion.
Other considerations in choosing the right pneumatic system
connector include:
1. Type of connection and the function it performs
2. Operational pressure of the pneumatic system
3. Operating temperature range
4. P.S.I. requirements for your application
5. Amount of vibration produced by the pneumatic system
6. Thread type of the receiving fitting
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
