Construction Material Tile Adhesive Mortar Making Machine Dry Mortar Production Line

Construction Material Mixing Tile Adhesive Mortar Making Machine Dry Mortar Production Line

Introduction of MG Tile Adhesive Mortar Making Machine:

This production line adopted latest Germany Technology,the silo is in tower type,and latest management system applied in automatic control,improved the man-friendly operation and automatic in large extent.The capacity of this automatic dry mortar production line at 3-10 thousand tons one year.

Tile Adhesive Mortar Making Machine work flow:

1. Set weight and proportions of all kinds of raw material , then put the data into the PLC automatic batching system.

2. When the sand is dried, the sand and other raw materials should be put into the storage silo through conveying system.

3. Raw materials in the silo will be delivered to the weightless twin shaft paddle mixer, which is specially designed to meet customers' demands for the fast, precision mixing. The mixer discharges materials quickly and simply, with no difficult to clean dead spots.

4.When the materials are completely mixed, they will be put into the finished silo. Then the finished products should be delivered to the bags. Through the packaging system the bags should be packed.

5. All powdery materials are under the closed state, while feeding, batching, scaling, adding, discharging and packaging. Fully closed mixing unit and the dedusting system can reduce pollution of dust and noise to the environment effectively.

Main equipment for Tile Adhesive Mortar Making Machine:

Raw material storage silo,
Bucket Elevator,
Spiral Conveyor,
Weighing System,
Mixer,
End Product Silo,
Packing System,
Dedusting System,
Computer Control System,
Air Compressor,
Steel Structure.

Technical parameters of MGTile Adhesive Mortar Making Machine:

MG Tile Adhesive Mortar Making Machine in customer factory:

Double shaft paddle mixer equip on Tile Adhesive Mortar Making Machine: