Tyre Buffing Machine For Used Tyre Retreading Machine Cold Retread
Cold Tyre retreading line including 10 machines
1. Curing chamber
2. Tire buffing machine
3. Tire building machine
4. Envelope spreader
5. Rims remover
6. mixing machine
7. Extruding machine
8.Dust-collector
9. Tire conveyor
10.Inspection machine
Hot retreading & Precure “cold” retreading
There are two techniques for retreading:
The Benefits of retreading are that it is both environmentally
friendly and cost-efficient!
1. In cost aspect: The retreaded tire saves 50% at least compared
to the new tire.
2. Reduced 70% oil consumption and 80% environmental pollution
separately in the tire treating processes, extremely environmental
protection.
2-1 When the tread has worn off, only about 20% of the tyre is used
up. The carcass, which represents about 80% of the tyre’s value,
can be re-rubberized for a “new tyre life”
2-2 To produce a truck or bus tyre requires about 60-80kg of rubber
mixture. Retreading the tyre takes only about 15kg rubber. A
considerable amount of raw materials can therefore be saved.
2-3. To produce a car tyre requires about 28L of crude oil. To
retread a car tyre, only need 5.5L oil
3. Safe durable, is equally matched with the new tire.
4,Exercises in the same legal speed, regardless of is the security,
exercises the natural comfortableness , the retreaded tire all does
not have slightly the difference in the new tire.
5. The retreaded tire widely uses in the flight vehicle, the
utilization ratio have reached 90%.
