Working principle:
The packaged material is placed in the material box of the baler,
and the hydraulic cylinder works to press, and the packaged
material is compressed and formed into various metal blocks.
Technical Parameters
| 1 | Main oil cylinder | Model | YG240/160 | Qty. | 1pc |
| Normal force | 1250KN | Stroke | 450mm |
| 2 | Side pressure cylinder | Model | YG240/160 | Qty. | 2pc |
| Normal force | 1250kN | Stroke | 900mm |
| 3 | Material box specifications | 1200*700*600 mm |
| 4 | Size of bale | 300*300 mm |
| 5 | Bulk density (steel) | ≤1900/m³ |
| 6 | Capacity | About 7-15 bale/hr |
The parameters in the above table are for reference only.
Features
1. We have installed the guard board on the gate make the machine
stronger and more wear-resistant extend the machine service life.
2. We use blades on the door sides and feed box sides.The blades
can cut the extra scrap when machine working better to protect the
machine.
3. Use the high pressure soft oil pipe,which has better salability,
better anti-vibration, better resistance to leaking.
Application
The baler Can Compressing Machinery Scrap Iron Aluminum Metal Baler
is used to compress scrap metal(steel, copper, aluminum,stainless
steel, etc)into metal block or metal bale. The purpose is to save
the transportation cost or reduce the raw material loss when
smelting.
Shipping
FAQ
Q1 : Can I add my logo on the machines?
A : Yes,OEM and ODM are available for us.
But you should send us the Trademark authorization letter.
Q2 : How can i get the after-service?
A : We will send you the spare parts by free if the problems caused by
us.
If it is the men-made problems, we also send the spare parts, but
you should pay.
Q3 : Do you have inspection procedures for machines?
A : 100% self-inspection before packing
Q4 : Can I have a visit to your factory before the order?
A : Sure, welcome to visit our factory.
Here is our factory address:No.29, Panlongshan Road, Jiangyin City,
Jiangsu Province, China.
Q5 : Can we order one set machine?
A : Yes, you can.
