UPVC MAKING WINDOW AND DOOR, WINDOW WATER SLOT LOCK HOLE MAKING

1. For end milling of transom and door frames in Aluminum profile.

2. Cutter is mounted on the High precision shaft ensure accurate and stable processing.

3. Automatic feeding.

4. Two vertical clamping ensure stable positioning.

5. Cutter easily changing for various profiles.

6. Various angle mullion milling for arch window or other special shape window.

7. Hand wheel for different height adjustment.

8. Safety covers on the milling cutter.

Main specification and technical parameter

Power supply: 380V 50HZ or customer specification.

Motor power: 1.5KW

Motor rotary speed: 2800r /min

Operation air pressure: 0.5-0.8MPa

Main shaft diameter: ø 32mm

Headstock feeding journey: 0～320mm

Milling cutter diameter: ø110～ø200mm

Worktable diameter: 500×350mm

Milling cutter width: 70mm

Desk lifting journey: 0～80mm

Turning angle of location board: 0～55°

Max processing hole size: 70×45×200 mm

Contour dimension: 850×740×1280mm(L×W×H)

Cutting surface roughness: Ra12.5µm

GME-TECH has been in business for over 20 years which specialized in the manufacture and supply the window fabricating machinery. Many of our employees including key engineer have been in the company in excess of 25 years. You won’t find that level of experience elsewhere. That quality of accumulated knowledge guarantees the good service and product knowledge. Our advantages include, but not limited to, machinery for PVC window and door, aluminum window and door.