Self Piercing Busbar Riveting Machine Aluminum Profile Assembly
Machine
Self Piercing Riveting System for Automatic Busway Production
Aluminum Profile Assembly Machine
The applications and features of self-piercing riveting systems are
always similar. On the basis of this knowledge we created three
standard configuration variants, which fulfil the majority of
requirements. Our two servo motor-driven self-piercing riveting
systems are designed for stationary or mobile use on a robot. Part
variants, complexity, vulnerabilities, maintenance intensity and
costs are therefore minimised, which reduces the need for special
rivet systems – all for your benefit!
Advantages of self-piercing riveting include:
- Fast, single operation joining process
- Can be used on unweldable materials and dissimilar material
combinations
- Little or no damage to pre-coated materials
- No fume or heat, low noise emission, low energy consumption
Equipment data on self-piercing riveting machine
| No. | Parameters |
| Model | KD-MJQ-2 |
| Max. Pressure | 250MPa |
| Oil Pipe Length | 10000mm |
| Oil Tank Capacity | 50L |
| Gun Head Stroke | 50mm |
| Aluminum Thickness | 3mm+3mm |
| Iron Thickness | 1.5mm+1.5mm |
| Power | 380~415VAC 50~60Hz 4.5kW |
Function introduction
Self-piercing riveting machine, also called riveting gun, is
applied for busbar assembly. It can be customized according to
different busbar housing. Before riveting, operator does not need
to drill the hole. Machine can realize self-piercing riveting by
its pressure and rivet structure. Working principal is as below.
Features:
1, The supercharger drives the split cylinder as the riveting power
source, which has the characteristics of low noise, low energy
consumption and no pollution.
2, The servo system controls the rivet clamp and the left and right
movement, to realize the two sides are simultaneously riveted by
the forward movement and the stop action of the roller.
3, The discharge line has a lateral removal function.
4, The busbar casing is no more than 3 meter length.
5, Feeding line has servo clamping mechanism, the most front-end is
3m roller table
