Max Flowing 20-30 T SS 304 Bag Filter Housing For Chemical Industy
Production description
The filter bag is supported by the stainless steel mesh inside. The
liquid flowa into the chamber via inlet, and go through the filter
bag. The impurities will be blocked into the filter bag. The filter
bag can be reused repeatedly after washing or cleaning and it's
easy to change the bag. The filter is features og no material
consumption and low operation cost.
Working principle
The bag filter is easy to operate. When in use, just install the
filter bag with the required fineness grade in the filter
cartridge, check whether the O-ring is intact, and then tighten the
ring bolt of the filter cartridge cover to put it into operation.
After the pump is started, the pressure gauge on the filter rises
slightly, and the initial pressure is about 0.05Mpa. With the
extension of service time, the filter residue in the cylinder
gradually increases. When the pressure reaches 0.4MPa, stop the
machine, open the cylinder cover, check the residue of the filter
bag, and replace the filter bag to continue to use (the filter bag
can generally be reused by cleaning).
Application
Widely used in paint, beer, vegetable oil, medicine, chemicals,
petroleum products, textile chemicals, photosensitive chemicals,
electroplating solution, milk, mineral water, thermal solvent,
latex, industrial water, sugar water, resin, ink, industrial
wastewater, fruit juice, edible oil, wax, etc.
Specification
| Models | No. of filter bags | Filtration Area(m2) | Flow rate (m³/h) | I/O Connections | Max pressure (Mpa) | Housing Diameter(mm) | Total Height(mm) | Housing Height(mm) |
| DL-2P2S | 2 | 1 | 70 | DN50 | 0.5 | 456 | 1572 | 1144 |
| DL-3P2S | 3 | 1.5 | 105 | DN80 | 0.5 | 508 | 1592 | 1190 |
| DL-4P2S | 4 | 2 | 140 | DN100 | 0.5 | 558 | 1632 | 1244 |
| DL-5P2S | 5 | 2.5 | 175 | DN150 | 0.5 | 608 | 1788 | 1254 |
| DL-6P2S | 6 | 3 | 210 | DN150 | 0.5 | 658 | 1854 | 1300 |
| DL-7P2S | 7 | 3.5 | 215 | DN150 | 0.5 | 710 | 1875 | 1340 |
| DL-8P2S | 8 | 4 | 280 | DN150 | 0.5 | 760 | 1922 | 1404 |
| DL-10P2S | 10 | 5 | 350 | DN200 | 0.5 | 910 | 2004 | 1430 |
| DL-12P2S | 12 | 6 | 420 | DN200 | 0.5 | 962 | 2064 | 1460 |
| DL-14P2S | 14 | 7 | 490 | DN200 | 0.5 | 1012 | 2124 | 1490 |
| DL-16P2S | 16 | 8 | 560 | DN250 | 0.5 | 1112 | 2146 | 1512 |
| DL-18P2S | 18 | 9 | 630 | DN250 | 0.5 | 1162 | 2225 | 1595 |
| DL-20P2S | 20 | 10 | 700 | DN250 | 0.5 | 1212 | 2280 | 1640 |
| DL-22P2S | 22 | 11 | 770 | DN250 | 0.5 | 1366 | 2320 | 1694 |
| DL-24P2S | 24 | 12 | 840 | DN300 | 0.5 | 1416 | 2358 | 1748 |
Strength
♦ The side leakage probability of the filter bag is small, which
effectively ensures the filtration quality.
♦ Bag filter can bear greater working pressure, with small pressure
loss, low operation cost and obvious energy-saving effect.
♦ The filtering accuracy of filter bag has been continuously
improved and has reached 0.5 μ m.
♦ Bag filter has the advantages of large treatment capacity, small
volume and large pollution capacity.
♦ Based on the working principle and structure of the bag filter
system, it is convenient and fast to replace the filter bag, and
the filter is free from cleaning, saving labor and time.
♦ The filter bag can be reused after cleaning to save cost.
♦ Bag filter has a wide range of applications, flexible use and
various installation methods.
