Silicon Rubber Keypads/Rubber Button OEM Custom Contact TV Remote
Control/Silicone Keypad
Material Description
Silicone Rubber (Q, MQ, VMQ, PVMQ)
*Service Temperature
For Silicones the service temperatures are from -60 C to 225 C.
Some special types can be used in extreme
temperature up to 300 C and down to -100 C.
*Application
Silicone rubber performs well under environmental and temperature
extremes. It is usually applied in automotive
and aerospace industries where flexibility and longevity are
important. It is also a suitable material for parts that
need FDA approval for food handling equipment and appliances.
| Material | SIL(Silicone Rubber) |
| Advantage | 1,Excellent Rebound Resistance |
| 2,Excellent Oxygen and Ozone Resistance |
| 3,Excellent Weathering and Heat Resistance |
| 4,Excellent Heat and Low Temperature Resistance |
| 5,Good heat insulation and heat dissipation. |
| 6,Good electrical insulation |
| Disadvantage | 1,Poor Aliphatic-solvent Resistance |
| 2,Poor Alkaline Resistance |
| Temperature | -50℃-220℃, -60℃-300℃(special formula) |
| Application | 1,the household appliances industry seal or rubber parts, such as
electric kettle, electric irons, microwave oven rubber parts. |
| 2,The electronics industry seal or rubber parts, such as mobile phone
keys, shock pad DVD, cable joint seal etc. |
| 3,Contact with the human body on various types of products on the
seal, such as water bottles, water dispensers |
Except silicone material ,we have many other rubber material .and
different material with different properties ,pls
refer to the below excel list :
| FKM product | Silicone product | NBR product | HNBR product | EPDM product | NR product | Peoprene product |
Abbreviation | FKM | silicone | NBR | HNBR | EPDM | Nature rubber | Neoprene |
Durometer(shoreA) | 60-90 | 30-90 | 20-95 | 50-90 | 30-90 | 20-90 | 20-95 |
Tensile(P.S.I) | 500-2000 | 200-1500 | 200-3000 | 2600 | 500-2500 | 500-3500 | 500-3000 |
Elongation(Max.%) | 300 | 700 | 600 | 530 | 600 | 700 | 600 |
Compression set | good | Good | Good | Excellent | Good | Excellent | Good |
Resilience-Rebound | Fair | Good | Good | Excellent | Good | Excellent | Excellent |
Abrasion Resistance | Good | Fair to poor | Excellent | Excellent | Good | Excellent | Excellent |
Tear Resistance | Good | poor | Good | Excellent | Fair | Excellent | Good |
Solvent Resistant | Excellent | poor | Good to excellent | Good | Poor | Poor | Fair |
Oil Resistant | Excellent | Fair to poor | Good to excellent | Excellent | Poor | Poor | Fair |
Our factory introduction:
We mainly specialize in producing different types of rubber grommet
,especially SBR grommet. o-ring repair kits, excavator o-ring kits,
rubber washer, customized rubber products.The materials are
available in NBR, FKM, EPDM,MVQ and HNBR.
We have more than one thousand available o-ring moulds and can open
new moulds as customers' drawings. We can also provide different
types of hardware tools kits like copper washer kits,snap ring
assortment kits, spring assortment, Hose clamp set and so on.
Our products can meet CE and ROHS requirements and have a big
market around the world.
You can see our factory enviroment from the picture
Products Show:
Process Flow:
Raw material test → Prescribe → Mixing Material → Cutting Material
→ First Cure → First Part Inspection → Casual Inspection
→ Burr Dealing → Eye Inspection → IPQC → Washing or Grinding → Post
Cure → FQC → Packing
Packing & Delivery:
Packing: PE bag inside, Carton outside.
Carton size: 46cm*34cm*34cm,40cm*34cn*34cm 51cm*34cm*34cm,
29cm*23cm*19cm
Delivery: Large quantity by ship, small quantity by air or express.
FAQ:
1,Are you manufacture or trading company ?
We are manufacture, we have two factories, one located in Shangrao
City,
Jiangxi Province, one in Dongguan City, Guangdong Province
2,Can I get samples from you ?
Of course, you can. If the samples you need we have in stock, you
can get them for free,
only need to pay for the express cost.
3,What's the term of payment ?
Amount < US$2000, 100% paid in advance by paypal or T/T;
Amount >= US$2000, 30% paid in advance, 70% balance before
shipment by T/T.
4,Can you produce OEM products ?
Yes, we can produce products by your drawing or samples.
5,What's your MOQ ?
If we have the products in stock , the quantity by your
requirement, If we don't have them in stock:
NBR, SIL, SBR, EPDM, NR: 100 US$; PU, HNBR, FKM: 150 US$
