New Item 12VDC IC Solution Dimming In Slim Design Microwave Sensor
Features
Slim design in IC solution
Powered by 12VDC output
0-10V Dimming
Remote control
Parameter Table
| Operating voltage | 7-15V, 12VDC Typical |
| Operating Current | ≤30mA |
| Stand-by power | ≤0.5W |
| Output Control | 0-10V Dimming |
| Detection area | 25%/50%/75%/100% |
| Hold time | 5S/30S/1min/10min/20min/30min |
| Daylight threshold | 2Lux/10Lux/30Lux/50Lux/80Lux/120Lux/Disable |
| Stand-by period | 0s/10s/30s/1min/5min/10min/30min/+∞ |
| Stand-by dimming level | 10%/20%/30%/50% |
| Microwave frequency | 5.8GHz±75MHz |
| Microwave power | <0.3mW |
| Mounting height | 2.5-4.5m |
| Detection range | Radius 3-7m |
| Detection angle | 150° Wall Mounted,360° Ceiling Mounted |
| Operating temperature | -35°C~+70°C |
| IP rating | IP20 |
| Life time | 50,000 hours |
Default Program
Detection area 100%
Holdtime 5S
Daylight Disable
Standby period 0S
Standby dimming level 10%
Size
Wiring
Function Performance
* Daylight Threshold
With sufficient daylight, even when motion detected, light remains
OFF.
* Bi-Level Dim
When motion is detected, the sensor will switch on the light to 100% brighteness.
After people leave the detection area, light remains 100%
brightness for the hold time.
After holdtime, sensor dims light to standby dimming level (10% 20%
30% 50%) and keeps for a standby period.
After standby period,sensors turns OFF the light.
* ON/OFF
When motion is detected, the sensor will switch on the light to 100% brighteness.
After people leave the detection area, light remains 100%
brightness for the hold time.
Preset standby period as 0S, sensor turns OFF the light after
holdtime.
Specification Download:
HDI02-01VR 12VDC input IC solution Dimming.pdf
