Medical diagnostic reagents glass plastic ampoule plastic vial
capping machine
Huituo full automatic rotary capping machine
Capping head: 4-16 head
Speed: 50-200bpm
Bottle volume: 3ml-500ml
Liquid: chemical or medical industry
Bottles suitable: cylinder, flat and irregular shapes
Caps suitable: screw cap, leak-proof cap, rubber stopper etc.
Highlights
1. Change capping torque via touch screen
There are two options available for capping.
Option 1 is the traditional permanent magnet clutch. There is scale
in the clutch showing the capping torque, which is cost-effective.
Option 2 is the servo torque control. Each capping head is
installed a servo motor, allowing torque change via touch screen.
Servo capping with more accurate torque.
Adjust the capping torque via touch screen (torque range 0 ~
3.5NM);
2. Connect to the filling machine on site synchronously
Huituo capping machine can realize synchronous connection with the
filling machine. If the filling machine stops, the capping machine
will stop. So does the acceleration.
3. Tool-free changeover within 15 min
It uses screw rod for bottle separation, with tool-free
quick-release design; no bottle, no cap, automatic alarm and
shutdown; The templates are made of polymer polyethylene(PE), fully
fitted to the bottle shape with smooth surface. It can not only
stabilize the positioning, prevent the bottle from being scratched.
Changeover time required: 15min for 2 workers
4. Unqualified products rejection
After capping, there is a dual-conveyor with sensors; The qualified
products are normally transported, and the unqualified ones (no
cap, no inner tube, tilted cap-higher than normal 2mm) will be
automatically split to another conveyor by swing cylinder.
