2" Inch 128x32 Graphic OLED display with SSD1309Z Parallel SPI I2C
Interface COG with Flex for Soldering
OLED 2” inch Display, 128x32 OLED Display Description
The Organic Light-Emitting Diode (OLED) is a new generation
technology, brighter and clearer images with more agile responding
speed. This OLED 2" inch model no. SFOS200TW-12832W-01 OLED display is made of 128 x 32 dots individual mono color. This
OLED module is lightweight, low power and small, there are
different interfaces optional; it is default SPI, Parallel and I2C
interface.
The size of the active area is 2” diagonal with module dimension 55.60(W) x 21.80(H) mm, active area dimension 50.54 (W) x 12.62 (H) mm. This 2 inches OLED display has built-in IC SSD1309Z and boasts high
contrast ratio 20,000 : 1. Logic supply voltage ranges from
1.65V-3.3V, the typical value is 3V. It is great for the
application such as medical device, POS system, white goods, home applications, industrial instrument,
automation, audio/visual display systems, personal care appliances,
household goods, automobile displays, Dynamic information displays
etc.
| Product: | 2" Inch Passive OLED | Resolution: | 128x32 Pixels Resolution |
|---|
| Display Mode: | Passive Matrix | Interface: | Parallel, SPI, IIC Optional |
|---|
| Display Color: | White | Optics: | All Viewing Angles |
|---|
| Outline Dim.: | 55.60(W)X21.80(H)X1.45(T) mm | Active Area: | 50.54(W) X 12.62(H) mm |
|---|
| Pixel Pitch: | 0.395 (W) X 0.395(H) | Driving Method: | 1/32 Duty Cycle |
|---|
| Operating Temp: | -20°C To +70°C | Storage Temp.: | -30°C To +80°C |
|---|
| Driver IC: | COG SSD1309Z | Supply Voltage: | 3V |
|---|
| Pin Number: | 31 Pins | Compliance: | REACH & RoHS Compliant |
|---|
Pin Definition
Pin1, NC, No connection.
Pin2, VCC, Power supply for panel driving voltage.
Pin3, VCOMH, COM signal deselected voltage level.
Pin4, IREF, This pin is the segment output current reference pin.
Pin5~Pin12, D7-D0, These pins are bi-directional data bus
connecting to the MCU data bus. Unused pins are recommended to tie
LOW. When serial interface mode is selected, D0 will be the serial
clock input: SCLK; D1 will be the serial data input: SDIN and D2
should be kept NC. When I2C mode is selected, D2, D1 should be tied
together and serve as SDAout, SDAin in application and D0 is the
serial clock input, SCL.
Pin13, RD#, When interfacing to a 6800-series microprocessor, this
pin will be used as the Enable (E)signal. Read/write operation is
initiated when this pin is pulled HIGH and the chip is selected.
When connecting to an 8080-microprocessor, this pin receives the
Read (RD#) signal. Read operation is initiated when this pin is
pulled LOW and the chip is selected. Serial interface, this pin
must be connected to VSS.
Pin14, WR#, This is read / write control input pin connecting to
the MCU interface. When interfacing to a 6800-series
microprocessor, this pin will be used as Read/Write (R/W#)
selection input. Read mode will be carried out when this pin is
pulled HIGH and write mode when LOW. When 8080 interface mode, this
pin will be the Write (WR#) input. Data write operation is
initiated when this pin is pulled LOW and the chip is selected.
When serial interface, this pin must be connected to VSS.
Pin15, D/C#, Data/Command data control pin.Low for command while
high for data.
Pin16, RES#, This pin is reset signal input. When the pin is LOW,
initialization of the chip is executed.Keep this pin HIGH (i.e.
connect to VDD) during normal operation.
Pin17, CS#, The chip select pin. Active low.
Pin18, NC, No connection.
Pin19, BS2, MCU bus interface selection pins.Please refer to table
followed for details of setting.
Pin20, BS1, MCU bus interface selection pins.Please refer to table
followed for details of setting.
Pin21, VDD, Logic voltage supply for IC
Pin22~Pin29, NC, No connection.
Pin30, VSS, Ground.
Pin31, NC, No connection.
OLED 2” inch Display, 128x32 OLED Display Description Drawing
OLED 2” inch Display, 128x32 OLED Display Real Product Image
FACTORY AND FACILITIES
CONTACT
Welcome to inquire via ck@saef.com.cn
