DIN EN X2CrNiN18-7 1.4318 Stainless Steel Flat Bar X2CrNiN18-7 Flat
Bar 1.4318 Bar
Description
Our company provides DIN EN X2CrNiN18-7 1.4318 Forged Stainless Steel Flat Bar
X2CrNiN18-7 Hot Rolled Flat Bar 1.4318 Cold Rolled Bar.
All of DIN EN X2CrNiN18-7 1.4318 Forged Stainless Steel Flat Bar
X2CrNiN18-7 Hot Rolled Flat Bar 1.4318 Cold Rolled Bar conform to Military standard, nuclear power. 100% Ultrasonic test
ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
- Material:Metal,Stainless Steel Flat Bar,DIN EN X2CrNiN18-7 1.4318.
- Shape:Stainless Steel Flat Bar.
- Square bar / Flat bar: 3mm to 800mm
- Length: Fixed length or random length or based on the customer's
special requirement.
Products Details
DIN EN X2CrNiN18-7 1.4318 Forged Stainless Steel Flat Bar
X2CrNiN18-7 Hot Rolled Flat Bar 1.4318 Cold Rolled Bar.
| Chemical Composition (weight%): | C (％): ≤ 0.030 |
| Si (％): ≤ 1.00 |
| Mn(％): ≤ 2.00 |
| P(％): ≤ 0.045 |
| S (％): ≤0.015 |
| Cr (％): 16.5 ~ 18.5 |
| Mo (％): - |
| Ni (％): 6.00 ~ 8.00 |
| N (％): 0.10 ~ 0.20 |
Mechanical Properties Under
Final Heat Treatment: | Condition: solution treatment |
| Tensile strength, σb/MPa: 630～830 |
| Yield strength, σ0.2≥/MPa: 330 |
| Elongation, δ5≥(％): 45.0 |
| Reduction of area, ψ≥(％): - |
| Impact strenght, Akv≥/J: 90 |
| Hardness HBS30: - |
Applications:
DIN EN X2CrNiN18-7 1.4318 Forged Stainless Steel Flat Bar
X2CrNiN18-7 Hot Rolled Flat Bar 1.4318 Cold Rolled Bar.
Bolt and nut,Chemical equipment,Mechanical parts used in the
condition of corrosion resistance,Pressure vessel.
Equivalent Grade
DIN EN X2CrNiN18-7 DIN EN 10088-1 2014
1.4318
DIN EN X2CrNiN18-7 1.4318 Forged Stainless Steel Flat Bar
X2CrNiN18-7 Hot Rolled Flat Bar 1.4318 Cold Rolled Bar.
FAQ
Q: How do you control the quality?
A: We have professional inspectors to analyze the chemical
composition of DIN EN X2CrNiN18-7 1.4318 Forged Stainless Steel Flat Bar
X2CrNiN18-7 Hot Rolled Flat Bar 1.4318 Cold Rolled Bar and test the finished products in strict accordance with the
standards stipulated in the contract. In this process, the inner
and outer surfaces, the appearance of both ends, bending, set
length, outer diameter and Wall thickness will be checked one by
one. You can rest assured that all products you receive from us are
reliable.
Q: Do you accept customization?
A: Yes. If you have special requirements for products or packaging,
we can make them for you.
Q: Can you accept trial orders?
A: Our MOQ is usually 1 ton. However, if you want to place an order
as the start of our cooperation, we can accept smaller quantities
at the first time. Of course, after the start, we will have further
and longer cooperation.
Q: How do I get samples?
A: Free samples are available for your inspection and testing,
DHL/FedEx/UPS accounts can be used for sampling, and the courier
fee is borne by you.
