DIN EN X8CrMnNi18-8-3 1.4376 Stainless Steel Flat Bar
X8CrMnNi18-8-3 Flat Bar 1.4376 Bar
Description
Our company provides DIN EN X8CrMnNi18-8-3 1.4376 Shot blasted Stainless Steel Flat Bar X8CrMnNi18-8-3 Cold working Flat Bar 1.4376 Rrough Turned Bar.
All of DIN EN X8CrMnNi18-8-3 1.4376 Shot blasted Stainless Steel Flat Bar X8CrMnNi18-8-3 Cold working Flat Bar 1.4376 Rrough Turned Bar conform to Military standard, nuclear power. 100% Ultrasonic
test ASTM E2375 /SAE AMS 2154 /T 4162 /EN 10228-3/SEP 1923 /GB.
- Material:Metal,Stainless Steel Flat Bar,DIN EN X8CrMnNi18-8-3
1.4376.
- Shape:Stainless Steel Flat Bar.
- Square bar / Flat bar: 3mm to 800mm
Products Details
DIN EN X8CrMnNi18-8-3 1.4376 Shot blasted Stainless Steel Flat Bar X8CrMnNi18-8-3 Cold working Flat Bar 1.4376 Rrough Turned Bar
| Chemical Composition (weight%): | C (％): ≤ 0.10 |
| Si (％): ≤ 1.00 |
| Mn(％): 5.00~8.00 |
| P(％): ≤ 0.045 |
| S (％): ≤0.015 |
| Cr (％): 17.0 ~ 20.5 |
| Mo (％): - |
| Ni (％): 2.00 ~ 4.50 |
| N (％): ≤0.30 |
Mechanical Properties Under
Final Heat Treatment: | Condition: solution treatment |
| Tensile strength, σb/MPa: |
| Yield strength, σ0.2≥/MPa: |
| Elongation, δ5≥(％): |
| Reduction of area, ψ≥(％): |
| Impact strenght, Akv≥/J: |
| Hardness HBS30: |
Applications:
DIN EN X8CrMnNi18-8-3 1.4376 Shot blasted Stainless Steel Flat Bar X8CrMnNi18-8-3 Cold working Flat Bar 1.4376 Rrough Turned Bar
Mechanical parts used in the condition of corrosion
resistance,Pressure vessel,Bolt and nut,Chemical equipment,etc.
Equivalent Grade
DIN EN X8CrMnNi18-8-3 DIN EN 10088-1 2014
1.4376
DIN EN X8CrMnNi18-8-3 1.4376 Shot blasted Stainless Steel Flat Bar X8CrMnNi18-8-3 Cold working Flat Bar 1.4376 Rrough Turned Bar
FAQ
Q: How do you control the quality?
A: We have professional inspectors to analyze the chemical
composition of DIN EN X8CrMnNi18-8-3 1.4376 Shot blasted Stainless Steel Flat Bar X8CrMnNi18-8-3 Cold working Flat Bar 1.4376 Rrough Turned Bar and test the finished products in strict accordance with the
standards stipulated in the contract. In this process, the inner
and outer surfaces, the appearance of both ends, bending, set
length, outer diameter and Wall thickness will be checked one by
one.
Q: Do you accept customization?
A: Yes. If you have special requirements for products or packaging,
we can make them for you.
Q: Can you accept trial orders?
A: Our MOQ is usually 1 T. However, if you want to place an order
as the start of our cooperation, we can accept smaller quantities
at the first time.
Q: How do I get samples?
A: Free samples are available for your inspection and testing,
DHL/FedEx/UPS accounts can be used for sampling, and the courier
fee is borne by you.
Standard Seaworthy Package
based on the customer's special requirement
