ASTM 321H Stainless Steel Round Bar S32100 Round Bar X7CrNiTi18-10
ASTM A336 Bar
Description
Our company provides ASTM 321H/S32100 Stainless Steel Round Bar UNS
S32100 Round Bar X7CrNiTi18-10 ASTM A959-2004.
All of ASTM ASTM 321H/S32100 Stainless Steel Round Bar UNS S32100
Round Bar X7CrNiTi18-10 ASTM A959-2004 conform to Military
standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS
2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
- Material:Metal,Stainless Steel Round
Bar,321H/S32100,X7CrNiTi18-10,X7CrNiTi18-9/1.4940,STS 312HFB,SUS
F321H.
- Length: Fixed length or random length or based on the customer's
special requirement
- Shape:Stainless Steel Round Bar
- Round bar / Wire rod (Diameter): 5.5mm to 800mm
Products Details
ASTM 321H/S32100 Stainless Steel Round Bar UNS S32100 Round Bar
X7CrNiTi18-10 ASTM A959-2004
| Chemical Composition (weight%): | Mechanical Properties Under Final Heat Treatment: |
C (％): ≤ 0.020
Si (％): ≤ 0.50
Mn (％): 2.00 ~ 4.00
P (％)≤: 0.030
S (％)≤: 0.005
Cr (％): 24.0 ~ 25.0
Ni (％): 21.0 ~ 23.0
Mo (％): 7.00 ~ 8.00
Other (％): Cu 0.30 ~ 0.60,N 0.45 ~ 0.55 | Form: Plate,sheet,strip
Condition: annealing
Tensile strength, σb/MPa: 750
Yield strength, σ0.2/MPa: 430
Elongation, δ (％): 40.0
Reduction of area, ф (％): -
Hardness | HBW: 250
Cold bending property: N |
ASTM 321H/S32100 Hot Rolled Stainless Steel Round Bar UNS S32100
Cold Rolled Cold working Round Bar X7CrNiTi18-10 Rrough Turned
Grinding Centreless Ground
| Technical Standard | Equivalent Grade |
| ASTM A336/A336M(2003a) | 321H/S32100 |
| BS EN 10088-1(2005) | X7CrNiTi18-10 |
| NF EN 10088-1(2005) | X7CrNiTi18-10 |
| DIN EN 10088-1(2005) | X7CrNiTi18-9/1.4940 |
| KS D3691(2001) | STS 312HFB |
| JIS G3214(1991) | SUS F321H |
| ISO/TS 4955(2005) | X7CrNiTi18-10 |
ASTM 321H/S32100 Stainless Steel Round Bar UNS S32100 Round Bar
X7CrNiTi18-10 ASTM A959-2004
FAQ
Q: How do you control the quality?
A: We have professional inspectors to analyze the chemical
composition of raw materials and test the finished products in
strict accordance with the standards stipulated in the contract. In
this process, the inner and outer surfaces, the appearance of both
ends, bending, set length, outer diameter and Wall thickness will
be checked one by one. You can rest assured that all products you
receive from us are reliable.
Q: Do you accept customization?
A: Yes. If you have special requirements for products or packaging,
we can make them for you.
Q: Can you accept trial orders?
A: Our MOQ is usually 1 ton. However, if you want to place an order
as the start of our cooperation, we can accept smaller quantities
at the first time. Of course, after the start, we will have further
and longer cooperation.
Q: How do I get samples?
A: Free samples are available for your inspection and testing,
DHL/FedEx/UPS accounts can be used for sampling, and the courier
fee is borne by you.
