Inconel alloy 705 Alloy Steel Plates Inconel 705 Alloy Steel
Inconel 705 Alloy
Description
Our company provides Inconel alloy 705 Milled Alloy Steel Plates Inconel 705 Ground Alloy Steel Inconel 705 Shot blasted Alloy.
All of Inconel Inconel alloy 705 Milled Alloy Steel Plates Inconel 705 Ground Alloy Steel Inconel 705 Shot blasted Alloy conform to Military standard, nuclear power. 100% Ultrasonic
test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
- Material:Metal,Inconel alloy 705 Alloy Steel Plates Inconel 705
Alloy Steel Inconel 705 Alloy
- Length: Fixed length or random length or based on the customer's
special requirement
Heavy/middle plate via hot rolled: T6 - 200mm X W10 - 1500mm X
L1000-12000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in
coil form)
Sheet steel via cold rolled: T0.5 - 6mm X W6 - 1000mm X L1000 -
2000mm
Products Details
Inconel alloy 705 Alloy Steel Plates Inconel 705 Alloy Steel
Inconel 705 Alloy
| Chemical Composition (weight%): | C (％): ≤ 0.30 |
| Si (％): ≤ 5.50 |
| Mn(％):≤ 0.90 |
| Cr (％): 15.5 |
| Fe (%): 8.0 |
| Cu (%): ≤ 0.50 |
| Ni (%): Remainder |
Mechanical Properties Under
Final Heat Treatment: | Condition: Solution + Stabilize + Precipitation harden |
Heat treatment pratice:- |
| Tensile strength,σb/≥ MPa: - |
| Yield strength, σ0.2/≥ MPa: - |
| Reduction of area, ψ≥(％): -Elongation, δ ≥(％): - |
| Reduction of area, ф ≥ (％): - |
| Hardness | HBW: - |
Applications:
705 Milled Alloy Steel Plates Inconel 705 Ground Alloy Steel Inconel 705 Shot blasted Alloy
Starndard specification for high-temperature bolting, with
expansion coefficients comparable to austenitic stainless steel
with yield strength ranging from 345 to 827 MPa for use in
high-temperature service such as fasteners for pressure vessel and
valve flanges.
Nuclear reactor
Turbine engine parts - mechanical gears, gear shaft, main axis,
blade
Mechanical parts - bolt and nut, fastener
Gas turbine blade
Fuel nozzle,etc
705 Milled Alloy Steel Plates Inconel 705 Ground Alloy Steel Inconel 705 Shot blasted Alloy
FAQ
Q: How do you control the quality?
A: We have professional inspectors to analyze the chemical
composition of Inconel alloy 705 Alloy Steel Plates Inconel 705
Alloy Steel Inconel 705 Alloy and test the finished products in
strict accordance with the standards stipulated in the contract. In
this process, the inner and outer surfaces, the appearance of both
ends, bending, set length, outer diameter and Wall thickness will
be checked one by one. You can rest assured that all products you
receive from us are reliable.
Q: Do you accept customization?
A: Yes. If you have special requirements for products or packaging,
we can make them for you.
Q: Can you accept trial orders?
A: Our MOQ is usually 1 ton. However, if you want to place an order
as the start of our cooperation, we can accept smaller quantities
at the first time. Of course, after the start, we will have further
and longer cooperation.
Q: How do I get samples?
A: Free samples are available for your inspection and testing,
DHL/FedEx/UPS accounts can be used for sampling, and the courier
fee is borne by you.
Packing method
Wooden Pallet BOX,Standard Seaworthy Package,based on the
customer's special requirement,etc
Submit an enquiry for the displaying steel materials you are
interested in TODAY! Sales Engineer: sales@ss-bars.com
