DIN 40NiCr6 1.5711 Structural Steel Flat Bar DIN 40NiCr6 Flat Bar
DIN 1.5711 Bar
Description
Our company provides DIN 40NiCr6 1.5711 Structural Steel Flat Bar DIN 40NiCr6 Flat Bar
DIN 1.5711 Bar.All of DIN 40NiCr6 1.5711 Structural Steel Flat Bar DIN 40NiCr6 Flat Bar
DIN 1.5711 Bar conform to Military standard, nuclear power. 100% Ultrasonic test.
- Material:Metal,DIN 40NiCr6 1.5711 Structural Steel Flat Bar DIN 40NiCr6 Flat Bar
DIN 1.5711 Bar
- Metal Type:structural steel series.
- Square bar / Flat bar: 3mm to 800mm
Packing details:
DIN 40NiCr6 1.5711 Structural Steel Flat Bar DIN 40NiCr6 Flat Bar
DIN 1.5711 Bar Products are well packed and clear labeled according to the
regulations and customer's requests.Intact packages are able to
avoid any damage which might otherwise be caused during storage or
transportation.
Products Details
DIN 40NiCr6 1.5711 Structural Steel Flat Bar DIN 40NiCr6 Flat Bar
DIN 1.5711 Bar is provided with higher yield strength, tensile
strength, endurance strength, yield ratio (about 0.85 generally )
enough plasticity and toughness.
| Chemical Composition (weight%): | C (％): 0.38 ~ 0.43 |
| Si (％): ≤ 0.35 |
| Mn (％): 0.70 ~ 0.90 |
| P (％)≤: 0.035 |
| S (％)≤: 0.025 |
| Cr (%): 0.55 ~ 0.75 |
| Ni (%): 1.10 ~ 1.40 |
| Mo (％): - |
Mechanical Properties Under
Final Heat Treatment:
| Tensile strength σb≥/MPa: 950 |
| Yield strength σs≥/MPa: 755 |
| Elongation δ5 ≥(%): 12.0 |
| Reduction of area ψ(％) ≥: - |
| Hardness + annealed condition: HBW 269 max. |
DIN 40NiCr6 1.5711 Structural Steel Flat Bar DIN 40NiCr6 Flat Bar
DIN 1.5711 Bar may be furnished in one of the following conditions: stress
relieving; annealing; solution treatment; solution treatment and
ageing; normalizing; normalizing and tempering; or quenching and
tempering.
Equivalent Grade:
DIN 40NiCr6 DIN 17200(1987)
1.5711
FAQ
Q: How do you control the quality?
A: We have professional inspectors to analyze the chemical
composition of DIN 40NiCr6 1.5711 Structural Steel Flat Bar DIN 40NiCr6 Flat Bar
DIN 1.5711 Bar and test the finished products in strict accordance with the
standards stipulated in the contract. In this process, the inner
and outer surfaces, the appearance of both ends, bending, set
length, outer diameter and Wall thickness will be checked one by
one. You can rest assured that all products you receive from us are
reliable.
Q: Do you accept customization?
A: Yes. If you have special requirements for products or packaging,
we can make them for you.
Q: Can you accept trial orders?
A: Our MOQ is usually 1 ton. However, if you want to place an order
as the start of our cooperation, we can accept smaller quantities
at the first time. Of course, after the start, we will have further
and longer cooperation.
Q: How do I get samples?
A: Free samples are available for your inspection and testing,
DHL/FedEx/UPS accounts can be used for sampling, and the courier
fee is borne by you.
