Temporary Floor Protection Paper Roll During Construction And
Renovation
BTO floor protection paper is a kind of heavy construction paper.
It provides temporary floor protection against water spills, paint
splashes, scratches and foot traffic. It is thicker than ordinary
construction kraft paper and Korean pine paper, but it has good air
permeability and can continue to solidify the floor.
Product overview
BTO floor protection paper is 50% thicker than ordinary building
kraft paper and Korean pine paper. This floor paper is hard and
heavy enough to provide excellent protection for the floor and
surface. 32 inch x 100 foot drum. Excellent floor protection. More
durable than Kraft construction paper.
This heavy-duty floor paper provides excellent protection for all
types of floors and surfaces, including hardwood floors, stairs,
cabinets and even countertops. It has good durability to protect
your floor from the most lasting wear and reduce the loss of
replacement at work. The plate with thickness of 1mm is the
preferred temporary floor protection solution for the needs of
construction specialty!
If you are planning a home improvement project, it may be helpful
to know how to protect the floor during construction. The floor
should last for a long time, but heavy objects, paint and debris
will shorten the service life of the floor. The solution to your
problem is a floor protector so that you can save time and money
instead of replacing the floor.
| Material Science | paper | Product type | Building paperboard |
| Total length | 120 inches | Recommended environment | Indoor |
| Overall width | 32 feet | Special functions | Waterproof and breathable |
| Weight | 17kg | Thickness | 1mm |
Features:
• The thickness of floor protection plate is about 1mm
• New liquid shield technology
• Quick drop flat
• Reusable
• A roll will cover the same 10 stonemasons
• Hard enough to drive
• Non stain
• Can be stitched together over a large area
• Breathable, allowing moisture to escape
• Breathable tape with building board in large area of joint part
The contractor and / or installer shall determine the appropriate
way to install and use the product according to the situation. If
it is to be used, first determine how much paper is required to
cover your surface, unfold the floor protective paper to cover the
edge, and then stick the joint with breathable tape or joint tape.
Finally, fix the floor protection paper in place with adhesive
tape. In addition, if tape is used, ensure that the surface is
clean and that the tape is firmly fixed to the floor. Consult the
floor manufacturer for recommended tape. Test before use.
Quick and easy installation and disassembly # heavy duty tear proof
material # minimize spillage damage # zero residue
Our Advantage
