Fep high temperature Coated Tinned Copper Wire,High Temp Electrical
Wire About FEP wire
FEP high temperature coted wire is a type of fluoroplastic
insulated wire,It has very similar properties to PTFE and PFA such
as low friction and non-reactivity to chemicals.
1. FEP has a lower melting point than other cable materials like
PTFE and PFA. The exact point hovers at around 260°C (500°F).
2 .Electrically speaking, only PFA outdoes FEP wire. That means the
material has one of the highest dielectric strengths available. At
the same time, FEP dissipates at a rate that is six times that of
PFA. The end result is that FEP better conducts electrostatic
fields non-linearly.
3. If you have welding requirement on wire’s connection,Tinned Copper
FEP wires are recommendated
Applications
1. Internal wiring for electronic devices, information devices,
etc.
2. Wiring for use near furnaces and engines which reach high
temperatures
3. Secondary lead wires for general equipment
4. Wiring in environments with high and low temperatures
Properties of FEP high temperature coted wire
1. Working Temperature: -65°C to +200℃
2. Rated Voltage: AC 600V or below
3. Insulation:FEP high temperature
4. Conductor:Tinned copper wire
Section area
(mm2) | Conductor construction
piece/diameter
(mm) | Insulation thickness
(mm) | Outer diameter
(mm) | Max. Conductor resistance at 20℃
(Ω/Km) | Packing length
(m) |
| 0.014mm2 | 7/0.05 | 0.15 | 0.45 | 1454 | 500 |
| 0.035mm2 | 7/0.08 | 0.15 | 0.6 | 568 | 500 |
| 0.05mm2 | 7/0.1 | 0.15 | 0.6 | 356 | 500 |
| 0.08mm2 | 7/0.12 | 0.2 | 0.76 | 245 | 500 |
| 0.12mm2 | 7/0.15 | 0.25 | 0.85 | 163 | 500 |
| 0.2mm2 | 7/0.2 | 0.25 | 1.1 | 90.4 | 200 |
| 0.35mm2 | 19/0.16 | 0.25 | 1.3 | 53.1 | 200 |
| 0.5mm2 | 19/0.18 | 0.25 | 1.4 | 40.1 | 200 |
| 0.75mm2 | 19/0.23 | 0.25 | 1.7 | 24.6 | 200 |
| 1mm2 | 19/0.26 | 0.25 | 1.8 | 20.4 | 200 |
| 1.2mm2 | 19/0.28 | 0.3 | 2 | 16.6 | 200 |
| 1.5mm2 | 19/0.32 | 0.3 | 2.2 | 12.7 | 200 |
| 2mm2 | 19/0.37 | 0.3 | 2.45 | 10 | 100 |
| 2.5mm2 | 19/0.41 | 0.4 | 2.95 | 7.43 | 100 |
| 4mm2 | 37/0.37 | 0.4 | 3.4 | 4.88 | 100 |
| 6mm2 | 37/0.45 | 0.5 | 4.2 | 3.3 | 100 |
| 8mm2 | 133/0.28 | 0.5 | 5.2 | 2.3 | 100 |
| 10mm2 | 133/0.32 | 0.5 | 5.8 | 1.82 | 100 |
| 16mm2 | 133/0.39 | 0.6 | 7 | 1.22 | 100 |
| 20mm2 | 133/0.45 | 0.6 | 8 | 0.919 | 100 |
| 25mm2 | 196/0.4 | 0.6 | 8.8 | 0.795 | 100 |
| 35mm2 | 494/0.3 | 0.7 | 10.4 | 0.565 | 100 |
| 50mm2 | 396/0.4 | 0.8 | 12.2 | 0.393 | 100 |
| 70mm2 | 551/0.4 | 1 | 14.6 | 0.277 | 100 |
| 95mm2 | 760/0.4 | 1.2 | 17.2 | 0.21 | 100 |
Noted:Specification and core no. are not limited to above
regulation,they could be customized.
