FX3G-60MR/ES-A PLC Programmable Logic Controller Mistubishi Wholesale Price

FX3G-60MR/ES-A PLC Programmable Logic Controller Mistubishi Wholesale Price

Bsic info:

AC power / DC input type
Input: 36 points (40) DC24V Sink / source
output: 24 points Relay
inputs X044 to X047 (4 points) are empty numbers

Features:

Control scale: Up to 256 points (when CC-Link and AnyWire remote I / O are configured)
Terminal block type standard machine that can add input / output
System upgrades such as analog and communication are possible
Function expansion board 2 Units can be connected (only one unit can be connected for 14-point and 24-point types)
Easy measurement of input pulse width and cycle with high accuracy of 10 μs (high-speed pulse width / pulse cycle measurement function)
Sequence control to capture short signals Easy setting (pulse catch function)

Ambient temperature			0-55 ° C: During operation, -25-75 ° C: During storage
Relative humidity			5 to 95% RH (no condensation) ・ ・ ・ ・ ・ ・ During operation
Vibration resistant	When mounting the DIN rail	Frequency: 10-57Hz	One-sided amplitude: 0.035mm X, Y, Z 10 times in each direction (80 minutes in total) Judgment criteria are based on IEC 61131-2
		Frequency: 57-150Hz	Acceleration: 4.9m / s 2　X, Y, Z 10 times in each direction (80 minutes in total) Judgment criteria are based on IEC 61131-2
	At the time of direct mounting	Frequency: 10-57Hz	One-sided amplitude: 0.075mm X, Y, Z 10 times in each direction (80 minutes in total) Judgment criteria are based on IEC 61131-2
		Frequency: 57-150Hz	Acceleration: 9.8m / s 2　X, Y, Z 10 times in each direction (80 minutes in total) Judgment criteria are based on IEC 61131-2
Impact resistance			147m / s 2 , action time 11ms, sine and cosine half-wave pulse 3 times in each direction of X, Y, Z Judgment criteria are based on IEC61131-2
Noise resistance			Based on a noise simulator with a noise voltage of 1,000 Vp-p, a noise width of 1 μs, a rise of 1 ns, and a period of 30 to 100 Hz.
Withstand voltage			When conducting a withstand voltage test, use the following voltage between each terminal and the ground terminal of the basic unit. Between power supply terminal (AC power supply) and ground terminal: AC1.5kV 1 minute DC24V service power supply, and between input terminal (DC24V) and ground terminal: AC500V 1 minute Between output terminal (transistor) and ground terminal: AC500V 1 minute
Insulation resistance			When conducting an insulation resistance test, use the following voltage between each terminal and the ground terminal of the basic unit. Between power supply terminal (AC power supply) and ground terminal: 5MΩ or more with DC500V insulation resistance tester DC24V service power supply, and between input terminal (DC24V) and ground terminal: 5MΩ or more with DC500V insulation resistance tester Output terminal (transistor) and ground terminal Between: 5MΩ or more with DC500V insulation resistance tester
ground			Class D grounding (grounding resistance: 100Ω or less) <Common grounding with strong electric system is not possible> Grounding should be dedicated grounding or shared grounding.
Usage atmosphere			No corrosive or flammable gas, no terrible conductive dust
Altitude used			It cannot be used in an environment where the pressure is 2000 m or less and the atmospheric pressure is higher than the atmospheric pressure. It may break down.

Changsha Zhinian Automation Equipment Co., Ltd   has been a reliable retailer specializing in famousbrand industrial automation products for more than a decade. With its headquarter located in Changsha, the capital city of Hunan province, we set up branches and warehouse in Dongguan city in Guangdong province for sake of convenient delivery.

Our company mainly deal with advanced automation products which are sounding brand 100% original new, such as Programmable Logic Controllers , Human Machine Interface, Servo motor,Sensor,Encoder, Inverter, Servo drive, Battery, Cable ,Relay Switch of Mitsubishi, Omron, Proface,Fuji,Siemens and so on.

We are fully responsible to all of our products and strictly control the product quality. We focus on befor-e after sales service, consult, quality guarantee, training base on customer benefit and satisfy.