DESCRIPTION
The JaourTak ® is a synthetic rubber based hot melt pressure
sensitive adhesive specifically developed for label applications
where good permanent adhesion is required. The product is featured
high tack and peel, good wetting to substrates, oil resistant and
good die-cuttability.
SUGGESTED USES
Permanent labels, and other pressure sensitive applications that
high peel strength and tack are required.
TYPICAL PROPERTIES
| Appearance | Yellow hazy solid |
| Color (Gardner) | ≤ G6 |
| Softening Point (R&B) | approx. 101°C |
| Viscosity (Brookfield) | |
| @120 °C | approx. 132,000 |
| @140 °C | approx.43,900 |
| @160 °C | approx.12,700 |
| @180 °C | approx.5,600 |
OPERATING GUIDES
The material can be applied by slot or roll coating applicators.
Suggested operation temperature is 150 – 180 ° C for both,
depending on machines, substrates, and plant conditions.
FDA STATUS
The product complies with the FDA Indirect Food Contact Regulation
of 21 CFR 175.105, “Adhesives”.
PACKAGE
6.25kg or 1kg block wrapped with siliconized release paper,
25kg/box or 180kg fibre drum. Please consult the sales
representative for special requirements.
STORAGE & SHELF LIFE
The intact packing material can be stored indoor for 24 months,
from the date of manufacture, in its original packages under dry
and clean conditions at ambient temperature below 35 ° C and above
5 ° C.Direct sunlight and moisture condensation must be prevented.
OPERATING PRECAUTIONS
Do not mix with other adhesives to prevent contamination. The
material is applied hot. Appropriate personal protective clothing
and eye protection are strongly recommended to prevent burns.
Adequate ventilation is suggested to remove any vapors or fumes
generated. Rotate stocks and using the oldest stock first.
