DESCRIPTION
The JaourTak ® is a hot melt pressure sensitive adhesive
specifically developed for industrial tape applications. The
product is features high tack and peel, high shear, no residuals
after peeling-off, and good ageing performance.
SUGGESTED USES
The product is suitable for the industrial tape application, such
as kraft paper tapes.Other industrial tape applications that high
bond strength and tack, high shear, no residuals after peeling-off
are required.
TYPICAL PROPERTIES
| Appearance | Yellow transparent solid |
| Color (Gardner) | Yellow transparent |
| Softening Point (R&B) | approx. 95°C |
| Viscosity (Brookfield) | |
| @120 °C | approx.86,000 cps |
| @140 °C | approx.21,000 cps |
| @160 °C | approx.9,500 cps |
| @180 °C | approx.5,400 cps |
OPERATING GUIDES
The material can be applied by slot or roll coating applicators.
Suggested operation temperature is 150 – 180 °C for slot coater,
depending on machines, substrates, and plant conditions.
FDA STATUS
The product complies with the FDA Indirect Food Contact Regulation
of 21 CFR 175.105, “Adhesives”.
PACKAGE
6.25kg/block wrapped with siliconized release paper and 25kg/box.
Or, 1kg block wrapped with siliconized release paper, 25kg/box.
Please consult the sales representative for special requirements.
STORAGE & SHELF LIFE
The intact packing material can be stored indoor for 24 months,
from the date of manufacture, in its original packages under dry
and clean conditions at ambient temperature below 35 0°C and above
5 0°C. Direct sunlight and moisture condensation must be prevented.
OPERATING PRECAUTIONS
Do not mix with other adhesives to prevent contamination. The
material is applied hot. Appropriate personal protective clothing
and eye protection are strongly recommended to prevent burns.
Adequate ventilation is suggested to remove any vapors or fumes
generated. Rotate stocks and using the oldest stock first.
