Energy conservation Suction uniform Screw Grout Pump durable
machine
Screw Grout Pump
Structure of Screw Grout Pump:
1. Hopper:
Hopper for welding parts, by feeding pipe and bucket shaped box
welding, hopper is provided with a screen, can filter the material.
Hopper capacity is about 150L, can store slurry for grouting pump.
2. Turbocharged stator assembly:
The supercharged stator assembly is composed of rubber stator,
supercharged worm, stator outer cylinder, adjusting bolt and other
parts. The uniform array of the outer cylinder of the stator has 18
M6×12 screws, which are embedded in the rubber stator to
effectively prevent the displacement of the stator. By adjusting
the 4 compression bolts of the outer cylinder of the stator, the
tightness of the worm can also be controlled, which is used for
pressure adjustment and compensation after wear.
Parameters of Screw Grout Pump:
| Model | LBT2000 |
| Output | 2000-2500 L/H |
| Motor power | 4 kw |
| Sand particle size | ≤ 4 mm |
| Pressure | 2-4 Mpa(adjustable) |
| Hopper | 150 L |
Safety Precautions of Screw Grout Pump:
1. During construction, the slurry pump and grouting hose should be
fixed, and the grouting hose should be in a relaxed state;
2. After grouting, it is necessary to clean the slurry pump and
grouting hose in time, and the switch is in the stop position, in
time
3. At any time can not put the hand into the hopper or hard things
into the conveyor screw operation;
4. Pay attention to environmental safety.
Pictures of Screw Grout Pump:
