high Power Hydraulic type Gypsum Mortar Pump floor heating backfill
Gypsum Mortar Pump
Application of Gypsum Mortar Pump:
1. In construction engineering: horizontal and vertical conveying
mortar or large area coating;
2. In chemical sector and transport pulp in the pulp and paper
industry raw materials and waste;
3. In thermal power plant is used for transporting fly ash slurry;
4. In the national defense and civil air defense engineering,
mining tunnel construction for grouting slope protection;
5. In the highway pavement maintenance for cement grouting filling
of pavement failure;
6. Used for mortar injection expansion in pre-stressed engineering,
etc.;
7. Used for reinforcing dam in water conservancy project;
8. In metallurgy, iron and steel and other industries in the slurry
infusion for maintenance of blast furnace and other equipment.
Parameters of Gypsum Mortar Pump:
| Model | GSJ200 |
| Grouting (flowing) capacity | 12 m³/h |
| Working pressure | 15 Mpa |
| Motor power | 22 kw |
| Number of cylinder | 2 |
| Particle size | less than 5mm |
| Suction pipe diameter | 75 mm |
| Discharge pipe diameter | 38 mm |
Working performance of Gypsum Mortar Pump:
1.Because of full hydraulic pressure, small volume and light
weight, it can be used in a wide range of construction.
2.The adjustable performance is better: within the design range,
the pressure displacement of the pump can be arbitrarily adjusted.
When the pressure exceeds the allowable pressure, the relief valve
will automatically open and the cylinder and working cylinder will
stop working, thus playing a safe role.
3.In coal mines and other flammable and explosive construction
sites, the series of hydraulic grouting motors use explosion-proof
motors, but also can be used safely.
4.The anti-seismic pressure gauge is installed in the oil pressure
system, which can accurately reflect the working state of the pump.
5.This series of hydraulic grouting pumps can also be used as water
pumps, sewage pumps and mud pumps.
Characteristics and scope of application of Gypsum Mortar Pump:
1. In highway pavement maintenance, it is used for grouting filling
of cement pavement collapse.
2. In the pre-stressed component engineering, it is used for the
expansion of mortar injection.
3. In underwater engineering, the dam is strengthened.
4. It is used for grouting slope protection in national defense,
national defense engineering and mine tunnel construction.
5. It is used to transport fly ash slurry in thermal power plants.
6. In the chemical industry and paper industry, pulp raw materials
and wastes are transported.
7. In metallurgy, iron and steel and other industries, it is used
to maintain the grouting of blast furnaces and other equipment.
Picture of Gypsum Mortar Pump:
