Tunnel Culvert Used Compact Type Grout Pump for Sale Energy
Conservation
Grout Pump for Sale
Description of Grout Pump for Sale:
BW series grout pump for sale is a horizontal single-cylinder
reciprocating single-acting piston pump, which consists of BW50-5
and BW60-10 specifications. It is mainly used for grouting
construction of road, bridge, dam, national defense, mine and other
construction projects.
Technical parameters of Grout Pump for Sale:
| Cylinder number | 1 |
| Bore diameter | 80mm |
| Piston stroke | 90mm |
| Suction height | 2 meter |
| Diameter of suction pipe | 51mm |
| Diameter of outlet pipe | 32mm |
| Motor power | 5.5kw |
| Main shaft speed | 1440 r/min |
| Working pressure | 5 Mpa |
| Dimension size | 1550×550×80mm |
| Weight | 200kg
|
Structure of Grout Pump for Sale:
Grout pump for sale is mainly composed of pump body, pump frame,
air chamber, shock-resistant pressure gauge, motor, V-belt and
pulley cover.
The installation foundation of cement grouting pump should be
smooth and not inclined.
The pump is fixed on the foundation with the foot screw to prevent
the vibration of the pump during operation.
Preparations before pumping:
After the pump has been stopped or reinstalled for a long time, the
following preparations must be made before starting.
1. Check whether there is enough lubricating oil in each part.
2. Check whether the suction pipe of the filter is unblocked.
3. Check whether there is obstruction in the movement of each part.
4. Check the accuracy and reliability of the transmission
mechanism.
5. Check the looseness of fasteners, especially the screw
tightening of rubber piston locking nut, cross head and piston rod
connection thread.
6. Check the suction height of the pump. The maximum suction height
of the pump should not exceed 2.5 meters in areas below 1000 meters
above sea level. In areas above 1000 meters above sea level, the
suction height of the pump should be reduced according to the local
atmospheric pressure reduction.
7.Check the position of the filter immersed in the mud tank.
Generally, the mud level should be below 0.3-0.5 meters, and the
filter should be no less than 0.5 meters away from the bottom of
the mud tank.
