CuBe2 C17200 BrB2 Alloy 25 Beryllium Copper Billet For Wire Rod
Production
Product Normal Description:
Product Name: Beryllium copper Billet
Grade: CuBe2 C17200 BrB2 Alloy 25
Dia.: 100~200mm
Length: 500~600mm
State: A(TB00)
Product Brand: CUBERYLLIUM®
Introduction of CuBe2 C17200 BrB2 Alloy 25 Beryllium Copper Billet:
We could provide C17200, also called CuBe2, BrB2, Alloy 25,
beryllium copper billet.
With diameter 100~200mm, and the length 500~600mm.
The beryllium copper billet could be used for the production of
rods and wires.
We also could provide C17300, C17500, C17510 beryllium copper
billet.
If you have any requirement on the beryllium copper alloys, plz
feel free to contact with us.
CuBe2 C17200 BrB2 Alloy 25 Beryllium Copper Alloy Chemical Composition:
| Grade | Be | Co+Ni | Co+Ni+Fe | Cu |
| C17200 | 1.80-2.00% | 0.20% Min | 0.60% Max | Balance |
Note: Copper plus additions equal 99.5% Minimum.
Typical Physical Properties of CuBe2 C17200 BrB2 Alloy 25 Beryllium
Copper Alloy:
| Grade | Density (g/cm3) | Density before age hardening (g/cm3) | Elastic Modulus (kg/mm2 (103)) | Thermal Expansion Coefficient (20 °C to 200 °C m/m/°C) | Thermal Conductivity (cal/(cm-s-°C)) | Melting Range (°C) |
| C17200 | 8.36 | 8.25 | 13.40 | 17 x 10-6 | 0.25 | 870-980 |
Typical Application for CuBe2 C17200 BrB2 Alloy 25 Beryllium Copper Alloy:
Electrical Industry: Electrical Switch and Relay Blades, Fuse
Clips, Switch Parts, Relay parts, Connectors, Spring Connectors,
Contact Bridges, Belleville Washers, Navigational Instruments,
Clips
Fasteners: Washers, Fasteners, Lock Washers, Retaining Rings, Roll
Pins, Screws, Bolts
Industrial: Pumps, Springs, Electrochemical, Shafts, Non-Sparking
Safety Tools, Flexible Metal Hose, Housings for Instruments,
Bearings, Bushings, Valve Seats, Valve Stems, Diaphragms, Springs,
Welding Equipment, Rolling Mill Parts, Spline Shafts, Pump Parts,
Valves, Bourdon Tubes, Wear Plates on Heavy Equipment, Bellows.
Product Photos:
International Specification of CuBe2 C17200 BrB2 Alloy 25 Beryllium
Copper Billet:
Rods/Bars/Tubes: ASTM B196,251,463; SAE J461,463; AMS
4533,4534,4535; AMS 4650,4651; RWMA Class 4
European Standards: CuBe2, Alloy 25, QBe2, BrB2, DIN.2.1247, CW101C
to EN
Note:
ASTM: American Society for Testing and Materials
SAE: Society of Automotive Engineers
AMS: Aerospace Materials Specification(Published by SEA)
RWMA: Resistance Welder Manufacturers' Association
Note: Unless otherwise specified, material will be produced by
ASTM.
FAQ:
Q1: Could you produce Beryllium Copper strip by Mill Hardened
process.
A1: Yes, we could produce AM(TM00), 1/2HM(TM01).HM(TM04) XHM(TM06)
XHMS(TM08).,we are the only factory could do harden strip in China.
Q2: What’s the advantages the Beryllium Copper of CUBERYLLIUM®.
A2: 1: The Biggest Coil weight could be reach 1200kg/Coil
2: We are the only one who melting by Vacuum semi-Continuous
Furnace.
3: Surface further polishing for top clients.
Q3: Why you melting by Vacuum semi-Continuous Furnace.
A3: Could be get the Cast ingot without gas,smaller segregation,
Grain Refinement
Q4: What's the payment terms?
A4: We accept T/T, L/C, Paypal etc. It can be negotiated when the
amount is different.
