18 Kw I Beam Bending Machine Tunnel Construction Equipment

Cold Steel Accurate Radian Angle Bending Machine New Technology

Angle Bending Machine

Use Skills of Angle Bending Machine:
1. No one is allowed to stand within the rotation radius of the bending steel and on both sides of the fuselage feed. The semi-finished products should be piled up neatly.
2. Bending long section steel, special support should be set up, supporting the section steel should work according to the command of the operator, not arbitrary push and pull.
3. It is forbidden to bend more than the i-steel cold bending machine specified type of steel, such as bending without cold drawing or rust with steel, must wear protective goggles.
4. The processed steel members are placed neatly according to the positioning management requirements, and the pad is placed flat.
5. After the work is finished, cut off the power supply, and clean the work site and I-steel cold bending machine, do a good job of the maintenance of the hydraulic I-steel cold bending machine, the rust in the pit seam is forbidden to dig with your fingers.

Parameter of Angle Bending Machine:

Pictures of Angle Bending Machine:

Henan Tytion Machinery Co., Ltd is a joint venture enterprise which is mainly offer construction support machine, such as: cement grout pump; high pressure grouting pump; mortar grout pump; hydraulic grouting pump (for two liquid grouting); dry mix shotcrete machine; wet shotcrete machine; concrete pump; tunnel machine; and environment friendly equipment: scrap shear machine and hydraulic baling machine.