wall construction environmental Gypsum Spray Plaster Machine
portable design
Gypsum Spray Plaster Machine
Operation of Gypsum Spray Plaster Machine:
1. If the pump pressure is insufficient, the booster stator bolt
can be adjusted or the booster rubber sleeve and the booster screw
can be replaced.
2. Before spraying, the spray surface should be permeated with
water and coordinated with the flattening process. The wall is too
dry or spraying after a long time will seriously affect the
leveling effect, to change the process.
3. To the hopper filling to uniform, not interrupted, when the
delivery of spiral rotation, is strictly prohibited with sticks in
the hopper stirring, to prevent wounding.
Parameters of Gypsum Spray Plaster Machine:
| Model | TY-511 |
| Motor power | 7.5 KW |
| Conveying pressure | 3 Mpa |
| Conveying height | 10 m |
| Conveying flow | 3 m3/h |
| Hopper volume | 5 L |
| Matching air compressor | 3 m3/h |
| Matching nuzzle | 32 |
Spraying Material of Gypsum Spray Plaster Machine:
1. Cement,mortar,putty powder;
2. Paint, latex paint, powder paint;
3. Waterproof material, fireproof material;
4. Thermal insulation, sound-absorbing material,etc.
Features of Gypsum Spray Plaster Machine:
1. Screw pump,high working pressure, flow stability.
2. Pump and air compressor integration, easy to move
3. High efficiency,save material,low labor intensity.
4. Spray dry powder, mortar and ordinary mortar.
5. Uniform spraying, strong adhesion.
6. Easy to operate,work reliably,long service life.
Pictures of Gypsum Spray Plaster Machine:
