Insulating glass warm edge spacer sealing rubber strip

1.Glass after washing and drying (no grease,water stains),was stick by the glass

spacer on a corner ,straightened spacer,keeping a distance of 2.5-3mm to the edge of the glass,and then press the spacer around the edge of the glass;

2.Install sealing tape at the interface. Leave 2mm-3mm gap at the interface,and leave 20mm connector outside. Then the sealing tape is inserted into the gap,and then pressing the connector with the sealing tape;

3.Place another piece of glass on the pasted glass by spacer,two pieces of glass must be aligned with each other,up and donw on the flat;

4.Put the two hollow glass pasted together into a pressing machine,pressing temperature control at between 110-140℃ ,exit temperature is controlled at 50-60℃;

5.Press the spacer at interface,single-channel sealing is completed(two-component silicone seal and could also be injected by request);

6.After inspection,hollow glass production is completed.Next process can be carried on;

Note:This product must be conducted in accordance with the sealing operation schematic flow butyl spacer,or it may lead to leakage.

1.Q:Are you a factory or trading company?

A:We are a factory .

2.Q:Is it OK to print my logo on carton?

A:Yes,Please informe us formally before our production and confirm the design.

3.Q:Do you accept credit card payment?

A:According alibaba regulation,we accept TT/Western Union/MoneyGram.Different payment would have different require of customer.

4.Q:Can I have a sample?

A:Yes, but you should pay the freight.

5.Q:How do you make our business long-term and good relationship?

A:We will always keep the best quality product and the most competive price to ensure our clients the best interests. Also we will regard you as our good friend in life and a reliable partner in business cooperation.