Auto Key Spring Metal Stamping Part Good Elasticity

Auto key spring metal stamping part

With the development of automobile technology, car remote key is more and more widely used in the car, its remote key

There are more and more kinds of functions and shapes. The different shapes of the keys also put forward higher requirements for the shrapnel structure on the PCB board used to contact the battery to realize circuit conduction. At present, the disclosed car key projetiles structure has the following problems: low tensile カ, bands are easy to fatigue deformation, which makes the rebound effect poor, affecting the use effect of shrapnel; The poor elasticity of the spring, small contact pressure カ and large contact resistance lead to oxidation of the contact points between protiles and batteries, and the service life is greatly reduced. In order to solve the problem of contact resistance, the existing technology adopts the method of increasing current flow, but this method is not practical. The battery is generally 3V button battery, and the replacement of high current battery requires the replacement of electronic components, which directly leads to the increase of cost.

The technical problem to be solved by the utility model is to provide a car key shrapnel structure with good elasticity and high tensile カ, so as to achieve good contact with the battery contact point and not easy to produce oxidation. In order to solve the above technical problems, the projetiles piece structure of the utility model comprises a projetiles piece body between a battery and a PCB board. The projetiles piece body comprises a vertical plate and a horizontal plate between the same end of two vertical plates. At the other end of the vertical plate is provided with a welding foot for welding on the PCB board. A first warping plate and a second warping plate are arranged between the vertical plates on opposite sides of the horizontal plate. The warping direction of the first warping plate is opposite to that of the second warping plate. The ends of the first and second warping plates are provided with sharp convex. The projetiles body surface is provided with a layer of nickel through electroplating. The utility model adopts the structure of projetiles, which has good projetiles structure and can enhance the contact pressure between the shrapel and the battery. Good projetiles make the contact point between the projetiles and the battery better, so that the contact resistance becomes smaller.

Advantages of Acid bright tin plating:

1. Tin is reduced by bivalent, saving electricity consumption;

2. Plating bath has high conductivity, low bath current and high current efficiency;

3. The operating temperature is close to room temperature, without heating equipment;

4. Gloss coating can be obtained by using appropriate additives;

5. Less damaging to the substrate.

About us

Jiaxing Dexun Co., Ltd. was established in 1997, origin from Taiwan, we are professional manufacturer and exporter integrated with design, research & development, manufacturing and sales of OEM/ODM stamping parts,deep drawing parts, standard welding fasteners and non-standard welding fasteners.

* Located in jiaxing city, only about 1 hour's drive from Shanghai, Hangzhou, Ningbo, Suzhou, these important cities, the transportation is very convenient.

* 2 mature mould development workshops with advanced equipment to develop mould for customers.

* 2 International approvals,Verify & certificate in accordance with ISO9001,IATF16949, work with SGS, operate the PPAP Level 3.

* 2 labs of quality inspection,Control products quality strictly; equipped with various quality testing machines including direct-reading spectrometers, tensile testing machines, CMM machine, X-ray flaw detection instrument.

* 2 quenching and tempering heat treatment lines.

* 2 automatic welding lines.

* 4 Powder coating & Painting lines, Plating lines

* 42 people professional R&D team : 30 special technicians and 12 senior engineers.

* 20 years’experience on manufacturering OEM/ODM products

* 100 sets of automatic production machines: Have 10 sets of automatic stamping & deep drawing equipments, 50 cold forming machines; 40 tooth grinding machines ,equipped with Japan, Germany,etc imported machines.

* 175 employees

* 10 millions monthly production capacity

* 35 countries exported to

* Supplying products to GM,John deere,Wal-Mart，etc

* Implement environment protection concept; strictly operate the facilities and processes under environmental requirements.

We use advanced equipment to improve cost and quality at the same time to make sure lowest price and best quality for customers. We have quality control experts & engineers to test every piece product before shipment. We keep on studying to provide professional service.

Our Mission & Vision

We always work hard to be an environment protection model enterprise. We strive for sustainable development. We hope to be a win-win partner of our customers all over the world.

Environment protection mission:

A full series of environment policies are applied to our every manufacturing activities. Firstly, to propagandize environment protection policy to make sure environment-friendly concept is everywhere in our company.
Every new staff will have environment protection training class. All staffs have environment protection knowledge and policy lecture every month. All the operation manual will marked out environment protection requirements.
Secondly, to establish environment protection responsibility policy.
Thirdly, to have basic environment protection management.
Step 1: Have environment monitor every time.
Step 2: Manage the pollutant treatment equipment efficiently.
Step 3: Establish permit system of pollutant discharge.
Step 4: Establish legal audit system.
Fourthly, to build up emergency rescue system.