CHN-TOP Self-developped Ultra Hard Material Cutting Machine With 2
years gurranty
ZT-JGQG6S is a new model of laser cutting machine. The
self-developed laser source makes better cutting performance,
completely replaced the traditional YAG cutting machine. Higher
cutting speed and thinner cutting kerf (2.0mm thickness PCD, the
cutting kerf is 0.06-0.08mm), smooth cutting surface, running
steady and maintenance-free. Suitable for cutting PCD/PCBN/
CVD/Sapphire/ PDC/ Cemented Carbide/Ceramics and other precious and
ultra-hard materials. Especially, it has incomparable advantages in
cutting low content PCBN.
Marble base table, not affected by temperature and humidity, stable
and not easy to deform.
Adopts advanced fiber laser module, more stable, more precise, more
durable and
maintenance-free.
The self-developed laser source, minimum after-sales service cost.
High efficiency, high precision cutting, thin cutting kerf, saves
the material.
3 times faster cutting speed than YAG, with smaller heat-affected
zone.
Two axis of the worktable are driven by servo motor, closed-loop
control, repositioning accuracy :s:0.005mm.
24 hours working, processing any 2D graphics, software supports
automatic model and manual model, equipped with CCD monitor.
Z axis step motor drive and A axis as rotary axis, can process the
material with relief angle.
Technical Parameters:
Power supply requirements | 380V50Hz, Five-core four-square power cord |
Working environment | Room temperature 20~40℃, humidity ≦60%, away from oil source |
Cooling Mode of Machine | Adopt dual temperature cooling system , laser cutting head cooled by room temperature water. Laser cooled
by 22℃cooling circulating water, and for manufacturing workpiece
cooled by purify oil-free compressed air. |
Laser Source | Fiber laser |
Duty Ratio | 1~100% |
Frequency | 1-2000 Hz |
Power percentage | 1%~100% |
Four Axis stroke | 300*300*50mm A-Axis 0±30° |
Maximun power output | 3000W |
Positioning accuracy | ≦± 0.005mm |
Repeat positioning accuracy | ≦± 0.005mm |
