Laser Engraving Cutting Machine For PCD / PCBN Tools Cutting
The fiber laser of ZT-JG6S machine adopts the maintenance-free
type, which saves the regular cleaning of the resonator and the
calibration and maintenance of the optical path in the daily use,
the fiber laser cutting machine is more environmentally friendly
and simple and convenient.
Mainly suitable for cutting ultra-hard materials ( PCD, PCBN,
Cemented Carbide, Ceramics). It can also cut some materials that
can not be machined by wire cutting. The cutting surface is fine,
with high cutting speed, precision and working efficiency. It is
more superior than normal YAG pump laser cutting machine by 2
times.
Technical Parameters:
Power supply requirements | 380V50Hz, Five-core four-square power cord |
Working environment | Room temperature 20~40℃, humidity ≦60%, away from oil source |
Cooling Mode of Machine | Adopt dual temperature cooling system , laser cutting head cooled by room temperature water. Laser cooled
by 22℃cooling circulating water, and for manufacturing workpiece
cooled by purify oil-free compressed air. |
Laser Source | Fiber laser |
Duty Ratio | 1~100% |
Frequency | 1-2000 Hz |
Power percentage | 1%~100% |
Four Axis stroke | 300*300*50mm A-Axis 0±30° |
Maximun power output | 3000W |
Positioning accuracy | ≦± 0.005mm |
Repeat positioning accuracy | ≦± 0.005mm |
Daily maintenance and maintenance
1. Check the operation of the laser carefully before turn on daily,
check the equipment button indicator lamp, stop the ammonium button
key switch is not normal.
2. check the circulating water level of water cooler water tank, if
not added in time.
3. Check protective lens for damage before daily cutting.
4. Clean up the dust and debris inside the worktable after each
shift is completed.
5. After one year of using , the machine tool and worktable should
be adjusted regularly to ensure the cutting accuracy of the machine
tool.
If the equipment is not in use for a long time, please apply butter
to the moving parts and rust-prone parts of the machine tool to
prevent rust.
