2.5mm Sheet Metal Forming Machine R Angle CNC Corner Forming
Machine With Moulds
This machine is used in the processing of sheet metal corner
moulding such as cold-rolled plate ,aluminum plate ,stainless steel
plate ,copper plate etc.
Widely used in the switching door ,cover plate ,aluminum single
panel curtain wall , switchboard ,container cover, household
appliances ,instruments and other fields.
This machine is used in the processing of sheet metal corner
moulding such as cold-rolled plate ,aluminum plate ,stainless steel
plate ,copper plate etc.
Widely used in the switching door ,cover plate ,aluminum single
panel curtain wall , switchboard ,container cover, household
appliances ,instruments and other fields
Technical Features
The forming and shearing is finished separately in two working
position ；
Install safety light curtain protection to make the production
process more safe and humanistic；
The accuracy of different thickness is controlled by Fuji servo
motors;
Parameters is adjusted through touch screen, some other movement is
controlled by Mitsubishi PLC.A set of mould is with the machine
,including :rolling mould ,square mould ,shear knife of a corner
radius.
Adopt the imported first-class brand components as our key
electrical components to ensure the reliability and stability of
the system.
The PLC controller with 68 points can store and save lots of sheet
metal corner moulding technologies, gap compensation coefficients
.At the same time ,it can save and rewrite the coefficients of
special materials and even the complex bimetal at any time
This machine improves work efficiency more than three times by
changing the tedious process of open-angle welding ,grinding etc
into rolling ,stretching and forming directly .it saves labor
,electricity ,gas ,grinding material and other accessories for
enterprises, therefore ,it is both environmentally friendly and
greatly reduces the production cost , could be regarded as the
enterprise save-money expert.
Parameters:
technical parameters | Content |
Model | BH-1-3 |
Processing Range
(mm) | Material | Thickness | Flange height
(mm) | Corner radius |
Cold-rolled plate | 0.6 | <10 | 1.5-50 |
0.8-1.2 | <20 | 1.5-50 |
1.5 | <25 | 1.5-50 |
2.0-3.0 | <30 | 1.5-50 |
304(higher level included)Stainless steel plate | 0.5-2.5 | 1-2mm lower than the flange height of the cold rolled plate | 1.5-50 |
Aluminum plate | 1-3 | Same as the flange height of cold rolled plate | 1.5-50 |
Processing time moulding one corner | About 9 sec. |
Processing time moulding fours corners | About 60 sec. |
Mould configuration | Rolling mould ,square mould ,shear knife |
AC servo motor | Fuji/Japan |
Pneumatic System | Airtac/Taiwan |
PLC | FATEK/Taiwan |
Low voltage electrical appliance | Schneider /France |
hydraulic valve | Huade/China |
Main motor power(KW) | 4 |
Dimensions(Length×Width×height) (mm) | 1560*1330*1600 |
Weight(KGS) | 1260 |
