Programmable LCD Touch Screen Climatic Test Chamber Shock
Temperature: -50°C~150°C
All units and assemblies are selected of high quality.
After assembly, the test chamber is tested in a continuous cycle
for two weeks to control the maintenance of the most difficult
conditions.
It is intended for research and quality control of various
materials, products, components, assemblies, structures,
mechanisms, measuring instruments, etc. associated with temperature
exposure at low temperatures down to -30 ° С and positive up to +
100 ° С and humidity from 10% to 98% at certain temperatures (on
request).
It is used to simulate special operating conditions in laboratories
of radio-electronic, mechanical engineering, food, chemical,
pharmaceutical, etc. industries.
The operating temperature range in the chamber from -30 ° C to +
100 ° C is maintained throughout the volume.
The range of humidity maintenance is from 10% to 98%, at
temperatures from + 10 ° С to + 85 ° С.
| Shock Temperature ragne | -65°C~150°C |
| Heating up time | RT~200°C about 35min |
| Cooling down time | RT~-70°C about 90min |
Temp recover time/ change time | ≤5min / ≤10sec |
| Temp control accuracy/ | ±0.5°C / ±2.0°C |
| distribution accuracy |
| Inner materials | SUS 304# stainless steel plate for inner chamber,and stainless
steel plate |
| + spray painting for external chamber. |
| Insulation materials | High-temperature high-density amino acid ethyl ester foam insulator
material. |
| Systems | P.I.D+S.S.R+Microcomputer balanced temperature control system. |
| Cooling systems | Semi-hermetic two-stage compressor (water-cooled) / |
| hermetic two-stage compressor (air-cooled). |
| Safety devices | Fuse switch, high and low pressure protection switch compressors, |
| refrigerant pressure protection switch failure warning system,
electronic siren. |
| Fitting | Outlook window (special purchase), the upper and lower adjustable |
| compartment two energized measured line hole, casters, level
bracket. |
| Power | 3 phase AC380V 50HZ/60HZ |
| Controller | Tanwan TATO or TH900C |
| Compressor | Germany / Bock Brand |
FRAME
The frame is made of various cold-rolled steel profiles (2 mm) with
anti-corrosion protection. The outer casing consists of steel
sheets (1 mm - 1.5 mm) cut with high-precision laser equipment and
powder coated ..
The standard body has a technological hole with a diameter of 50 mm
(optional additional technological holes up to 100 mm).
To reduce heat exchange with the environment between the working
chamber and the body, there is thermal insulation using
high-quality and durable insulation material.
Serial number | Volume | Inner size
D*W*H | Temperature range | Humidity range | Power 50hz/total rate (to be determined) |
01 | 80L | 400x400x 500 | 00~150°C
20~150°C
-40~150°C
- 50~150°C
-60~150°C
- 70~ 150°C
Selected according to test requirements | | 220V/5 KW |
02 | 100L | 400x500x 500 | 220V/6KW |
03 | 150L | 500x500x 600 | 220V/6.5KW |
04 | 225L | 600x 500x750 | 220V/7KW |
05 | 408L | 800x 600x850 | 220V/7.5KW |
06 | 800L | 1000x800x1000 | 220V/7.5KW |
07 | 1000L | 1000x1000x1000 | 220V/8KW |
Main indicators | a Temperature fluctuation: ≤±0.5°C, temperature uniformity: ≤+2°C
b Humidity error: ≤+2%/-3%R.H
c Cooling rate: 0.7~1°C/min, heating rate: 2~3°C/min
d Temperature change test chamber: cooling 3~5°C/min, heating
3~5/min
e Noise (dB)≤65 (all above are no-load) |
How a Humidity Chamber Works
The main components of a humidity chamber are mechanisms that
introduce moisture and heat. There are a variety of methods used to
introduce moisture into the chamber, which can be in the form of a
spray or bath. The same concept applies to heat that is supplied in
the form of coils or heating elements.
In most cases, humidity chambers are designed, manufactured, and
produced to fit the setting that the customer requires. Though
there are many varieties of chambers, the basic components of heat
and moisture are necessary to create the needed humid conditions.
We keep good quality and competitive price to ensure our customers
benefit ; We respect every customer as our friend and we sincerely
do business and make friends with them,no matter where they come
from. Each batch of parts is done quality sampling inspection
before into the warehouse, and Each product before delivery is
tested by the national authoritative third-party inspection agency
We produce:
- Climatic and refrigerating chambers, cold treatment chambers;
- A variety of industrial and laboratory drying ovens;
- Testing temperature and climatic equipment;
- Muffle and chamber furnaces;
- Various equipment under the order according to the customer's
specifications.
