SUS304 Stainless Fog Salt Mist Testing Equipment Dustproof Antiwear
OEM
Features:
1. Adopt automatically add water system, can watered by itself
while lack of water.
2. Precise glass spray nozzle, good uniformity, mist dropping
naturally, no Na-Cl crystallized salt.
3. Double over-heat protection devise and alarm when water short
storage to ensure use safety.
4. Digitally temperature controller, PID controlled.
5. Tapered Spray tower, even mist dropping.
6. Applicable fields including automobile parts, aviation
equipment, photographic equipment, building materials, electricity,
electrical and electronic systems.
7. Comply with ASTM B-287, JIS D-0205, H-8681, Z-2371, K-5400,etc.
Applicable Industries:
Salt Spray Test Machine Cyclic Corrosion Testers Salt Fog Cabinets
Chamber is used to test the anti-erosion quality of the surface of
all materials after the rust-proof of painting, coating,
electroplating, anoding and rust-proof of greasing.anti corrosion
treatment for a variety of materials, corrosion resistance of their
products.
Salt Spray Cycling Test Chamber can be used to simulated condition
that more often meet at natural environment, and then deteriorated
the natural environment to be tested, such as the salt spray, dry,
wet, room temperature, low temperature environment, it is used to
test the anti-erosion quality of the surface of all materials after
the rust-proof of painting, coating, electroplating, anoding and
rust-proof of greasing.anti corrosion treatment for a variety of
materials, corrosion resistance of their products.
Specifications :
Volume(L) | 108 | 270 | 480 | customi-zable |
Internal Size
W×H×W(mm) | 600×400×450 | 900×500×600 | 1200×500×800 |
External Size
W×H×W(mm) | 1150×1090×672 | 1450×1200×842 | 2080×1285×1240 |
Performance Index | Temperature Range | LaboratoryTemperature Range :RT~50℃
Saturated air barrel Temperature Range :RT~63℃ |
Temperature Deviation | ±1.0℃ |
Temperature Uniformity | ≤2.0℃ |
Temperature Fluctuation | ±0.5℃ |
Heating Rate | Test Room RT→+50℃≤60 min
Pressure Barrel RT→+63℃≤60 min |
Salt fog deposition | 1~2ml/80 square meter (At least 16 hours were collected and
averaged) |
Spray Pressure | 70~170Kpa |
Spraying Mode | Continuous spray |
Test time | 1~999(S,M,H)adjustable |
PH | 6.5~7.2 3.0~3.2 |
Main Part | Control System | temperature controller |
PT100 thermocouple (armor), PID control |
Spraying System | The Nozzle is made of special glass material, the size and angle of
spray can be controlled |
operate manual spray or set automatic spray according to program |
Structural Features | Material Enclosure | Imported PVC polyethylene board is adopted |
Medicament refill cylinder | hidden type supplementary water gauge |
Pressurized air drum | SUS304# stainless steel high-pressure barrel |
Test Rack | The plane indexing frame can be used to adjust the Angle of fog
falling or being foggy at any direction |
Cover Material | imported European acrylic board |
Spray Tower | air atomizing nozzle, height can be adjusted |
Spray volume collector | Cone funnel with diameter of 100mm |
Heating System | Titanium alloy heat pipe, steam heating, P.I.D. control heating |
Brine Tank | Made of PVC board |
Saturated air barrel | SUS304 Stainless |
Drain line | acid and alkali resistant PVC piping |
Heater | Titanium alloy armored electric heating tube (test chamber bottom
heating)
SUS316# stainless steel armoured heating tube (saturation barrel) |
Standard Fittings | 1 set of nozzles, 2 fog collecting and measuring cylinders, 2 fog
collecting collectors, etc. |
Safty Device | Leakage, short circuit, motor overheating, overload, over current
protection |
Supply Voltage | AC220V 50Hz |
Environment Requirement | Temperature 5.0~+30.0℃,Humidity≤85%RH,Air Pressure 86Kpa~106Kpa |
We keep good quality and competitive price to ensure our customers
benefit ; We respect every customer as our friend and we sincerely
do business and make friends with them,no matter where they come
from. Each batch of parts is done quality sampling inspection
before into the warehouse, and Each product before delivery is
tested by the national authoritative third-party inspection agency
Advantage:
1 Programmable control, touch screen operation
2. It can spray regularly, intermittently and evenly
3.24 hours online
4.Sample chamber of each model
5. Best price, fast delivery
6.OEM,ODM
7.Oversea offices
8.Own import and export business license
9.ISO,CE,UL,ASTM,DIN,EN,GB,BS,JIS,ANSI,TAPPI,AATCC,IEC,VDE
We also have rich experience in customizing environmental chambers,
like large-size walk-in temperature and humidity chamber, cyclic
salt spray chamber, special sand and dust test chamber.
