Shock Test Chamber / Environmental Thermal Shock Test Chamber Ce
Certification
Features:
The Thermal Shock Test Machine is divided into three chambers(three
zones): the high temperature chamer,the low temperature chamber and
the testing chamber
Reasonable structure, cooling speed quickly.
Import of refrigeration units, the main parts are imported
international brands, the whole system is equipped with multiple
protection devices, to improve reliability.
clever duct structure, small temperature deviation.
Door with observation window, the test specimen can be easily
observed state.
Mechanical sheet metal structure:
All functions are controlled by computer, it is self-developed
software, and has a good operation interface, which makes the
user's operation and monitoring more simple and intuitive. You can
set the time and parameters on the screen to switch between
cooling, heating, and blue transfer, and press the set button. The
setting is performed automatically.
The cold box and the hot box are independently controlled, and the
box doors are independent of each other, which expands the use
range of the test box (one box for three purposes).
The thermal insulation effect of the product can be fully
guaranteed.
The door of the test chamber is interlocked with the circulating
fan and the blue drive to protect the safety of the operator. Once
the door is opened, the power supply of the circulating fan and the
blue drive will be automatically cut off.
There is a standard lead hole tube on the top of the box, which is
convenient for users to introduce sensor lines, detection cables
and other types of leads into the box.
Application:
For electrical, electronics and machine parts to cold test, the
temperature gradient through rapid changes in conditions or the
suitability test. Especially suitable for electrical and electronic
products, environmental stress screening options (ESS) test.
| Temperature range | A.high-temperature : +60 degree to +150 degree |
| B.low-temperature : -10 degree to -40 degree |
| Control temperature | ±2 degree |
| resolution | 0.01 degree |
| Heating time at high-temperature region | From RT to 150 about 35min (RT is from 5 degree to 30 degree). |
| Cooling time at low-temperature region | From RT to -40 degree about 50min (RT is from 5 degree to 30
degree) |
| Moving time and temperature recover time | A. testing bastet moving from high-temperature to low-temperature
spend 10sec |
| B.after exchanging the temperature,the tempreature recovery time:
3min to 5min (Stabilization time ≥ 30min) |
| Device noise | Below 75dB. |
| Weight | 10Kg |
| Testing region(hot and cold) | 50cm(W)*50cm(H)*50cm(D) |
| Outside size | 140cm(W)*180cm(H)*142cm(D) |
| Testing basket size | 30cm(W)*40cm(H)*30cm(D) |
| Inside material | SUS#304 Cold-Heat-resistant stainless steel |
| Outside material | SUS#304 Cold-Heat-resistant stainless steel |
| Insolution material | High-density glass wool and high strength PU foam insulation |
| Anti-sweat structure | insulation layer and door micro-thermal anti-sweat |
| Expansion | Heat reach 300 degree,cold reach -100 degree |
Service:
1. Device installation;
2. Equipment Operation Test Technology training;
3. Equipment Calibration;
4. Daily maintenance and maintenance of equipment
5 Free technical training for visiting factories
6 24-hour Online contact
7 Free software upgrades
More produced:
Temperature Humidity Test Chamber
Walk-in Aging Chamber
Environmental Test Chambers
Thermal Shock Chamber
Fast Temp. Change Test Chamber
Vibration Shaker
Environmental Vibration Chamber
Mechanical Shock Tester
UV Chamber
Xenon Chamber
highly accelerated stress testing
Salt Spray Test Chamber
Paper Packing Test Equipment
Video Measuring System
Metallographic Analysis Equipment
Mechanical Test Equipment
Other Test Equipment
