Nickel Alloy Perforated Mesh High Temperature Resistance Perforated
Metal Mesh
Nickel Alloy Perforated Mesh Introduction:
Nickel alloy is high temperature and corrosion resistant. The alloy
of nickel and copper is called Monel; The alloy of nickel and
chromium is called Inconel.
Monel perforated screen has excellent corrosion resistance in
hydrofluoric acid, fluorine gas media, hot concentrated alkali
liquor, neutral solutions, water, seawater, the atmosphere and
organic compounds, etc.
Common Types:
UNS N04400 (Monel 400) – A corrosion-resistant alloy with the
largest amount, the most versatile and excellent comprehensive
performance.
UNS N05500 (Monel K500) – In addition to excellent mechanical
properties such as high strength, corrosion resistance and
non-magnetic properties, it also has the same corrosion resistance
of Monel 400.
Chemical Element of Monel (%) |
| Grade | Ni | Cu | Ti | Fe | C | Mn | Al | Si | S |
| UNS N04400 | min. | 63 | 28 | – | – | – | – | – | – | – |
| max. | – | 34 | – | 2.5 | 0.3 | 2 | – | 0.5 | 0.024 |
| UNS N05500 | min. | 63 | 27 | 0.35 | – | – | – | 2.3 | – | – |
| max. | – | 33 | 0.85 | 2 | 0.25 | 1.5 | 3.15 | 0.5 | 0.01 |
Mechanical Property of Monel |
| Grade | Tensile Strength (MPa) | Yield Strength (MPa) | Elongation at Break (0.2% offset) | Rockwell Hardness (HRB) |
| UNS N04400 | Anneal | 482–586 | 207–310 | 35–45 | 65–80 |
| Cold Rolling | 690–827 | 621–758 | 2–15 | 93 min. |
| UNS N05500 | Cold Rolling + Anneal | 621–724 | 276–448 | 25–45 | 85 max. |
Inconel perforated mesh has excellent high temperature oxidation
resistance, and won’t get embrittled after repeated heating and
cooling. It is well suited for extreme pressure and heat
environments.
Common Types:
The most common type of Inconel alloy is UNS N06600 (Inconel 600),
UNS N06601 (Inconel 601) and UNS N06625 (Inconel 625).
| Chemical Component of Inconel (%) |
| Grade | Ni | Cr | Fe | C | Mn | Si | Cu | Al | Ti | B | P | S |
| UNS N06600 | min. | 72 | 14 | 6 | – | – | – | – | – | – | – | – | – |
| max. | – | 17 | 10 | 0.15 | 1 | 0.5 | 0.05 | 0.3 | 0.3 | 0.006 | 0.015 | 0.015 |
| Grade | Ni | Cr | Fe | C | Mn | Si | Cu | Al | Ti | B | P | S |
| UNS N06601 | min. | 58 | 21 | 10 | – | – | – | – | – | – | – | – | – |
| max. | 63 | 25 | 15 | 0.1 | 1 | 0.5 | 1 | 1.7 | – | – | 0.03 | 0.015 |
| Grade | Ni | Cr | Ti | Fe | C | Mn | Al | Si | S | Mo | P | Nb + Ta |
| UNS N06625 | min. | 58 | 20 | – | – | – | – | – | – | – | 8 | – | 3.15 |
| max. | – | 23 | 0.4 | 5 | 0.1 | 0.5 | 0.4 | 0.5 | 0.015 | 10 | 0.015 | 4.15 |
Mechanical Property of Inconel |
| Grade | Tensile Strength (MPa) | Yield Strength (MPa) | Elongation at Break (0.2% offset) | Rockwell Hardness (HRB) |
| UNS N06600 | Annealed | 550-690 | 205-345 | 35-55 | – |
| UNS N06601 | Annealed | 570-750 | 225-400 | 35-55 | – |
| UNS N06625 | Annealed | 827-1034 | 414-621 | 30-55 | 145–240 |
Material: Monel, Inconel.
Parts of Specifications:
| Hole Diameter | Staggered Centers | Sheet Thickness | Open Area |
| 0.045" | 1.14mm | 0.66" | 0.033-0.039" | 0.84-0.99mm | 37% |
| 1/16" | 1.59mm | 3/32" | 0.027-0.033" | 0.68-0.84mm | 41% |
| 1/16" | 1.59mm | 1/8" | 0.027-0.066" | 0.68-1.68mm | 23% |
| 5/64" | 1.98mm | 1/8" | 0.027-0.053" | 0.68-1.35mm | 35% |
| 0.081" | 2.06mm | 1/8" | 0.053-0.066" | 1.35-1.68mm | 38% |
| 3/32" | 2.38mm | 5/32" | 0.053*0.066" | 1.35-1.68mm | 33% |
| 1/8" | 3.17mm | 3/16" | 0.027-0.127" | 0.68-3.23mm | 40% |
| 5/32" | 3.97mm | 3/16" | 0.027-0.056" | 0.68-1.68mm | 63% |
| 3/16" | 4.76mm | 1/4" | 0.027-0.127" | 0.68-3.23mm | 50% |
| 1/4" | 6.35mm | 3/8" | 0.033-0.011",0.25" | 0.84-2.82mm,6.35mm | 40% |
| 3/8" | 9.52mm | 1/2" | 0.053-0.082",3/16" | 1.35-2.08mm,4.76mm | 51% |
| 3/8" | 9.52mm | 9/16" | 0.059",0.119" | 1.5mm,3.02mm | 40% |
| 1/2" | 12.7mm | 11/16" | 0.033-0.127",3/16" | 0.84-3.23mm,4.76mm | 48% |
| 1/4" Hex | 6.35mm | 0.285" | 0.027-0.033" | 0.68-0.84mm | 76% |
| 3/8" Sq | 9.52mm | Cane" | 0.053-0.066" | 1.35-1.68mm | 51% |
Other Specifications according to your requirements.
Features:
Nickel alloy is high temperature and corrosion resistant.
Hole Patterns including:
Round; Rectangular hole; Square; Triangle; Diamond; Slotted Hole;
Hexagonal; Cross; Slotted; and other patterns according to your
drawings or application requirement.
Applications:
Architecture
Chemical industry.
Offshore industry.
Petrochemical industry.
Petrochemical industry.
Aerospace.
Packing:
Our Perforated Metal Mesh List:
Round hole perforated sheet
Square hole perforated sheet
Slot hole perforated sheet
Decorative Perforated Sheet
Embossed sheet
Perforated steel sheet
Perforated stainless steel sheet
Perforated aluminum sheet
perforated copper or brass sheet
Etched plates
Perforated metal noise barrier
Perforated filter form SS, carbon steel, aluminum, or copper sheet
Perforated tube
Perforated sunshade panel
Perforated kinetic facade
Anti-skid stair steps
Hexagonal hole perforated metal
Louver hole perforated metal
Raised Perforated Metal
Nickel perforated metal
Galvanized perforated metal
Carbon steel perforated metal
Perforated metal for filter
Perforated Metal for facade
