Welding Ring Johnson Wedge Wire Screens With Point Welding
Technique
stainless steel vee sharped wire / wrap wire, johnson screeen,
water well screen / rod based wire wrapped screen, wedge wire
screen, reverse wedge wire screen, stainess steel strainer pipe, v
wire slot tube, perfect roundness well screen pipe, dewatering well
screen, dewatering screen panel, wedge wire grating, v wire flat
panel, screen nozzle, water and gas strainer nozzle, stainless
steel filter nozzle, wedge wire support grids, sieve bend plate, v
wire screens, ARC screen, filter bottom nozzle, stainless steel
lateral screens, wedge wire filter candles, Rotary drum screens,
strainer cylinder, sand control well screen, oil well screen, rod
basedc ontinuous slot screens, header and hub laterals & hub radial
laterals etc.
Outer Diameter 168.3mm Water Filtration Johnson Wedge Wire Screen
Resin Trap Screen Predominantly used in water treatment processes
namely in 'Ion Exchange' and other numerous media filter systems,
Completion Products offers a Resin Trap Screen. This screening
system is primarily used as a safety device and is positioned
immediately after the outlet nozzle of the vessel/reactor.
Material:low carbon wire,stainless steel wire
Diameter:29-1200mm,can make as customers request
Slot size(mm):0.05-30mm,can make as customers request
Length:10-3000mm
End connection:male/female threaded couplings,welded rings/plain beveled ends
,flange,closed end plate,same slot size plate
Water Filtration Johnson Wedge Wire Screen Specification:
Triangle wire size:
| Triangle wire | Width | 1.0mm | 1.2mm | 1.5mm | 2.0mm | 2.2mm | 3.0mm |
| height | 2.0mm | 2.0mm | 2.0mm | 3.0mm | 3.5mm | 4.6mm |
| Slot | 0.02 mm-100 mm |
Support rod size:
| Support rod | Width | 2.0mm | 3.0mm | 3.0mm | 3.0mm | 4.0mm | 5.0mm |
| height | 3.0mm | 4.6mm | 5.0mm | 6.0mm | 7.0mm | 8.0mm |
| Distance | 20mm-30mm |
1. feedstock oil backwash cleaning filter device in the system for
petrochemical hydrogenation
2. precious metals catalysts recovery for hydrogenation system
3. Catalytic outer rejection oil automatic backwash cleaning filter
system
4. purification of liquid sulfur filter
5. lubricants and heat-conducting oil filter
6. paraffin raw materials and products of filter
7. the rich amine liquid backwash purification filter in the amine
desulfurization system
8. high-temperature coal gas, smoke gas and oil gas purification
9. raw materials of paraffin wax and a backwash purification filter
10. the gas-liquid mixing pressurized reverse washing efficiency
continuous filtration technology
Water Filtration Johnson Wedge Wire Screen Features:
A: Non-clogging surface.
B: Large open area.
C: Low-pressure drop.
D: Hydraulic efficiency
E: High flow rates.
F: Mechanical strength.
G: Abrasion-resistant.
H: Easy cleaning.
Water Filtration Johnson Wedge Wire Screen Specification
SIZE
(INCH) |
O.D (MM) |
SLOT (MM) |
LENGTH (M) |
COLLAPSE STRENGTH (BAR) |
TENSILE WEIGHT (TON) | WRAP WIRE(WIDTH*HEIGHT) (MM) | RODS (MM) |
| 3-1/2 | 88.9 | 1.0 | 3 | >22 | 10.2 | 2.3x3.5 | 3.8MM/22 |
| 4-1/2 | 114.3 | 1.0 | 3 | >28 | 11.5 | 2.3x3.5 | 3.8MM/22 |
| 6-5/8 | 168.3 | 0.75 | 5.8 | >40 | 12.8 | 2.3x3.5 | 3.8MM/32 |
| 6-5/8 | 168.3 | 1.0 | 5.8 | >33 | 12.8 | 2.3x3.5 | 3.8MM/32 |
| 6-5/8 | 168.3 | 0.63 | 5.8 | >83 | 45 | 3.2x6.0 | 6.0MM/32 |
| 8-5/8 | 219.1 | 1.0 | 5.8 | >34 | 21.9 | 2.3x3.5 | 3.8MM/48 |
| 8-5/8 | 219.1 | 1.0 | 5.8 | >50 | 38.2 | 3.0x5.0 | 4.0MM/48 |
| 8-5/8 | 219.1 | 1.0 | 5.8 | >60 | 46 | 3.2x6.0 | 5.0MM/48 |
| 10-3/4 | 273.1 | 0.75 | 5.8 | >50 | 32.9 | 2.3x3.5 | 4.9MM/55 |
| 10-3/4 | 273.1 | 1.0 | 5.8 | >60 | 39.5 | 3.0x5.0 | 4.9MM/55 |
| 10-3/4 | 273.1 | 1.0 | 5.8 | >100 | 48 | 3.2x6.0 | 5.0MM/55 |
| 12-3/4 | 323.9 | 1.0 | 5.8 | >120 | 37.2 | 3.0x5.0 | 4.0MM/50 |
| 14 | 355.6 | 1.0 | 3 | >80 | 37.8 | 3.0x5.0 | 4.0MM/59
|
OEM service:
We can produce products according to the needs of our customers.
Material: stainless steel 304, 316L, low carbon steel
Diameter: minimum diameter 32mm, maximum diameter 1270mm
Length: single tube can be up to 6 meters in length
Gap: 0.25mm, 0.5mm, 0.7mm, 1.0mm, 1.5mm is a regular gap. We can
produce gaps of 0.1-50mm
Joints: Generally, there are joints at both ends of the pipe, such
as flanges, weld rings, or threads, so that the pipes can be
connected to meet
---------------------------------------------------------------------------------------------------------------
FAQ
Q: Are you trading company or manufacturer?
A: We are manufacturer.
Q:To quote,what’s information needed?
A: Material, slot (mesh size), diameter/ width, length, end type /
frame size, quantity, usage,etc.
Q: How long is your delivery time?
A: It is 3-5 days if the goods are in stock; for mass order, it
based on the quantity.
Q: Could you provide free sample?
A: Yes, it is available for free sample, but the customers need to
pay the cost of freight, which can be deducted in following order.
Q: What is your terms of payment?
A: 30% T/T as deposit,the balance before shipment.
Q:How to confirm the quality about your products?
A:During production, a few samples can be delivered to you for
quality confirmation. but the customers need to pay the cost of
freight.
Q: How do you make our business long-term and good relationship?
A: Effective communication; Qualified products, competitive prices,
timely delivery, considerate service, etc.
