HRC67 2FLUTES
FLAT SOLID CARBIDE END MILL Choose good solid carbide, good quality
with cost-effective
GOOD WEAR RESISTANCE, LONG WORKING LIFE, NANO COATING
Made with Anka machine tools andGermantechnologyit can perform
finishing and semi-finishing on heat-treated materials below 66
degrees.enhance tool life reduce the number of
roundaboutsandprovide machine tool operation.
BIG DIAMETER DESIGN, SHARP CHIP REMOVAL
The unique helix angle is ground by first-class precision machine
tools.The large core diameter design enhances rigidityandshock
resistanceThe large chipremoval spaceis not easyto accumulate
chips,and is not easy to break. It is sharp and
wear-resistantcutting smoothly,and improvingmilling efficiency
WITH PASSIVATION TREATMENT DURABLE AND ANTI-CORROSION
Imported passivation equipmentfinely densified sand. increases the
corrosion resistance and wear resistance of the end mill. Good
grinding makes the cutting edge without chips. It can Extended the
working life.
SPECIFICATION SHEET
HRC672FlutesBallnoseSolidcarbideendmils
Materials Solid Carbide
Brand GREWIN
Coating Nano purple coating
Flute 2 flutes EWIN
Hardness HRC67
Spiral Angle 35°
45#steelcast lrontool steel and mould steel
Materials to be cut within HRC67
CNC machining centers,engraving machines
Machine to be used
and otherhigh-speedCNCmillingmachines
A SOLID CARBIDE END MILL WHO UNDERSTAND WHAT YOU WANT
Real end mill photo, you will get what you read from the picture
WIDE RANGE OF CUTTING MATERIALS
Materials to be cut:45# steelcast lrontool steel and mould steel
within HRC66
WARMLY TIPS
01 trial life of the milling cutter. Properly reducing the cutting
speed and feed rate can prolong the
02 cutting edge, which makes the cutting smoother. When working, it
is necessary to add cutting fluid to protect the
03 When there is an oxide film or other hardened layer remaining on
the surface of the workpiece, it can be removed by reversible
milling
INSTRUCTIONS FOR USE
What buyers need to know aboutend mill selection and operating
instructions
01.
Before using the tool,please measure the tool deflection.lf the
tool deflection accuracyexceeds0.01mm,please correct it before
cutting.
02.
The shorter the length of the end mill sticking out of the
chuck,the better.
If the end mill sticks out for a long time,it is necessary to
reduce the rotational speed,feed rate or cutting amount.
03. TCREWIN
During cutting,if abnormal vibration or sound occurs,please reduce
the cutting speed and the cutting feedrate until the situation
improves.
04.
The steel cooling is preferably spray and air jetwhich can
effectively improve the use effect of the milling cutter.
WITH PASSIVATION TREATMENT DURABLE AND ANTI-CORROSION
Imported passivation equipment, finely densified sand,increases the
corrosion resistance and wear resistance of the end mill. Good
grinding makes the cutting edge without chips. lt can Extended the
working life.
Brand | GREWIN |
Type | Solid Carbide End Mill |
Flutes | 4 |
HRC | 65 |
Flute Length | 3-45mm |
Overall Length | 50-150mm |
Cutting Diameter | 1-16mm |
Shank Diameter | 4-16mm |
- BIG DIAMETER DESIGN , SHARP CHIP REMOVAL
The unique helix angle is ground by first-class precision machine
tools. The large core diameter design enhances rigidity and shock
resistance .The large chip removal space is not easy to accumulate
chips, and is not easy to break. It is sharp and wear-resistant,
cutting smoothly, and improving milling efficiency.
Sharp Cutting Edge
Improve the effective
Hard and long working life
- WITH PASSIVATION TREATMENT, DURABLE AND ANTI-CORROSION
Imported passivation equipment, finely densified sand, increases
the corrosion resistance and wear resistance of the end mill. Good
grinding makes the cutting edge without chips. It can Extended the
working life.
