8 Port PoE Managed Switch L2 Fiber Optic Manageable Gigabit Rugged Network DIN Rail

8 Port PoE+ Industrial Gigabit L2 Managed Fiber Optic Switch

Specification of 2.5G Fiber Switch

Key Features

1. Support power on PoE IP cameras through the wireless access point (AP) of 5 categories of Ethernet cable.
2. IEEE 802.3af/at power on to 1 ~ 8 RJ45 ports
3. 8 x 10/100/1000Mbps Auto-sensing RJ45 ports
4. 2 x 100/1000/2500Mbps SFP fiber port
5. 6KV Ethernet surge protection, adapt to a harsh outdoor environment
6. Meet IP40 protection degree and EMC industrial grade requirements
7. DIN rail or Wall installations
8. Power range up to 100 meters
9. Comply with FCC and CE standards
10. Operating environment temperature: -40°C～75°C

Application

Software Features

• Support cable diagnosis and can locate the fault point
• Support IEEE802.3az EEE(Energy Efficient Ethernet) Management, optimize power consumption
• Support STP, RSTP, MSTP, ITU-T G.8032 Ethernet Protection Ring(EPR)
• Support QoS, transport classification QoS, CoS, bandwidth control(input/output direction), storm suppression, differentiated services
• Support IEEE802.1q VLAN, VLAN port, based Mac VLAN, IP subnet VLAN, Protocol VLAN, VLAN convert, MVR
• Support dynamic IEEE802.3ad LACP link aggregation, static link aggregation
• Support IGMP/MLD snooping V1/V2/V3, IGMP filtrating/ modulating, IGMP searching
• Support IGMP agent report, MLD snooping
• Safety: based on port and Mac IEEE802.1X, RADIUS, ACL, TACACS+, HTTP/HTTPS, SSL/SSH v2
• Support Cisco® like CLI, Web management, SNMP v1/v2c/v3, Telnet
• Support software upgrade via TFTP and HTTP, firmware redundancy prevents upgrade failing
• Support DHCP client/Relay/Snooping/Snooping option 82/Relay option 82
• Support RMON, MIB II, mirror image, event log, DNS, NTP/SNTP, IEEE802.1ab LLDP
• Support IPV6 Telnet server/ICMP v6, SNMP, HTTP, SSH/SSL, NTP/SNTP, TFTP, QoS, ACL

Please contact us for web manual or CLI manual

FAQ

1, What chip is it based?

Olycom: Vitesse

2, Can I customize it?

Olycom: Yes

We support OEM services like logo, model name, label, PVC mask and product parts(mounting kit, power terminal block etc.)

3, Can I connect it with 10/100M devices?

Olycom: Yes

For LAN ports, they are 10/100/1000M auto-sensing

For Fiber ports, please configure 100Mbps speed via Web GUI or CLI

4, Can I shut down PoE function for some ports when necessary?

A: Yes

All the PoE managed switches in this series support PoE management

Please just set PoE status via Web GUI or CLI

5, Do you do SKD/CKD?

A: Yes

As a factory, we have dealt with this many times.