EB Magnesium Alloy Tube Magnesium Alloy Pipe AZ31B AZ61A AZ91D
Parameter of Magnesiun Alloy Tube:
| type | magnesium alloy rod |
| Thickness | 300 mm or as customer's required
|
| Width | 900.0 mm or as customer's required |
| L'ength | 2000mm or as customer's required |
| size | 1000*2000mm, 1219*2438mm, 1219*3048mm, or as customer's required |
| Application | Carving, aerospace, auto, concrete tools, 3C (cell phone / camera /
compute), water heater, refrigerator,gas pipelines etc. |
Features of Magnesium alloy tube
| 1. Good resistance to deformation force 2. Good sag resistance 3. Good absorption of vibration energy performance 4. Good impact energy absorption characteristics 5. Low melting, small specific heat |
| Surface | ordinary industrial surface, or customized |
| Material | magnesium alloy |
Introduction of Magnesium Alloy Tube:
At present, the application of AZ31B magnesium alloy in the car is
also wide. Such as clutch housings, valve cover, transmission
cylinder head, air conditioner housing, etc. Steering wheel,
steering bracket, brake holder, etc. In order to increase the
absorption impact and light weight after the car is hit, a
magnesium alloy is used on the steering wheel and the seat.
According to the relevant research, 60% of the fuel used in the car
is consumed to be self-weight of the car, and the vehicle's own
weight is reduced by 10%. The fuel efficiency can be increased by
more than 5%; the automobile must decrease every 100 kg, which
reduces 0.7 l, each Saving 1 L fuel can reduce CO2 emissions 2.5 g,
and annual emissions is reduced by more than 30%.
Features of Magnesium Alloy Tube:
1. the weight is light: under equal rigid conditions, a thickness
of magnificellation is equivalent to 1.8 pounds of aluminum and 2.1
pound steel. Together, magnesium can make parts that are as messy
with aluminum but the components are only one-third of the latter.
The above features are critical about modern some portable
products. About vehicles, this feature will significantly reduce
their launching inertia and save fuel cost.
2. high heat radical: magnesium alloy has high cooling performance,
suitable for today's planned intensive electronic products.
Magnesium alloy heat conductivity is better than that of the
general structural metal, and the heat source is fast dispersion.
Once the notebook is overheated, it is easy to instably instably.
The current heat dissipation method is in the engineered plastic
housing, and the heat pipe is transferred from the heat pipe, and
the flood is mandated, so that heat transfer can be 150 times. The
above magnesium aluminum alloy is the best choice for advanced
laptops in the future.
3. outstanding casting performance: Magnesium promise the casting
wall thickness to 0.6 mm under the maintenance of outstanding
structural conditions. This is the wall thickness of the plastic
article in the same strength and cannot be reached. As for the
aluminum alloy, it can be compared with magnesium at 1.2 to 1.5 mm.
Others, magnesium alloys do not have tissue changes during
long-term use and temperature, low temperature (-10 ° C or lower),
no crisp.
4. can be recycled again: magnesium alloy information is not
lacking, you can refine from the sea water, and there will be no
problem with raw materials. Others, magnesium alloy materials can
be completely recycled and cast as the secondary data of AZ91D,
AM50 or AM60. Due to the continuous improvement of the demand for
die castings, it can be recycled and reused. This is fitted with
environmental protection, making magnesium alloys more attractive
than many plastic materials.
Details of Magnesium Alloy Tube:
Place of Origin | China Henan |
Chemical Composition | Magnesium >96% |
Color | Silver Grey |
Model Number | AZ31B AZ91D ZK61M |
Brand Name | DOME |
Application | Aerospace, Auto Parts or 3C Products |
Material | Magnesium alloy |
Customizable | Acceptable |
Certificate | ISO 9001 |
