SINO 2 Axis LED Digital Readout System DRO SDS6-2V
SDS6 series is the most popular series. They had been widely used
in high precision coordinate boring machine, floor boring machine,
grinding machine, lathe, milling machine and so on. It’s allowed to
input the high frequency of A/B signals up to 5MHz. It employs the
newest 16 bits SCM technology, can subsititute nearly all kinds of
requirement.The speed of measurement is faster, and the control
system is easier and smoother. Each axis can supply 40 points of
non-linear compensations to increase the accuracy.
SDS6-2V is the 2-axis display version of SDS6 series.
Basice information:
Available voltage: AC100~240V; 50~60Hz, different plug is possible
Power consumption: 15VA
Operating temperature: 0~45 degrees centigrade
Storage temperature: -30~70 degrees centigrade
Readout allowable input signal: TTL/RS422 square wave
Allowable input signal frequency: Less than 5MHz
Max resolution of digital display length: 5µm (0.005mm/0.0002")
Min resolution of digital display angle :0.0001/pulse
Strengthen Functions:
- Enlarge the calculator function:
The system can change the decimal digits to be three, four or five
digits to improve the calculating precision.
- Non-linear error compensation:
The system has the maximum 40 sections non-linear error
compensation to improve the machining precision.
- The numbers of decimal digits can be chosen in inch mode:
4 / 5 decimal digits can be chosen in inch mode. 4 digits can
satisfy long scale requirement, and 5 digits can satisfy high
precisions display.
- Communication:
RS-232-C interface can be required.
Packaging List :
| 1 PC | 2 Axis LED digital readout SDS6-2V |
| 1 PC | Transparent cover |
| 1 PC | Instruction Manual (English) |
| 1 PC | Power Cable |
Product image /photos:
The rack in the picture is optioned, not standard product.
