Electrodeposited coating of Platinum on Titanium TA1 High Porosity
30-90% Sintered Titanium Fiber Felt with Thickness 0.2-2mm---Best
GDL/PTL Materials for PEMWE
---Ultra-fine titanium fiber porous felt has the advantages of high
porosity, uniform pore size distribution and strong corrosion
resistance.It is an ideal anode diffusion layer material for PEM
hydrogen production.
1. DESCRIPTION
Our Porous fiber felt is produced with ultra-fine metal fibers
through special processing non-woven laying and high temperature
sintering. The main materials include TAl,Hastelloy,3l6L and Fecral
so on.
The ultra-fine titanium fiber felt achieves the best performance in
the anode diffusion layer of PEM for water electrolysis hydrogen
production with high porosity and high specific surface area.This
results in more efficient fluid and gas passage.
In the field of hydrogen health, it is the most preferred material
for improving the purity of hydrogen,the stability and lifetime of
electrolyzers.
In Chemical industry,ultra fine titanium fiber felt has excellent corrosion resistance
and can be used for filtration of corrosive liquids and special
gases.
2 Main Advantages for Platinized Titanium Fiber Felt
★Uniform pore size distribution
★Strong corrosion resistance
★Good water permeability
★High porosity
★ Good heat dissipation
★ High current density
★Low voltage
★ Stable performance and long service life.
Color |
Light gray |
Material |
TA1 |
Dimension |
Customized as request,12μm&20μm&40μm |
Thickness |
0.2mm-2mm Regular thickness 0.2,0.4,0.6,0.8,1.0mm |
Porosity |
30-90%(Customized as request) |
Size |
Customized as request ,Maximum 1200mm*1500mm |
Key words:
Proton exchange membrane water electrolyzer;
gas diffusion layer;
hydrogen production,
Titanium Pt Coated titanium gdl,
PTL for PEMWE(Porous Transport Layer forPEM Water Electrolysis)
GDL for PEMWE (Gas Diffusion Layer for PEMWater Electrolysis
